Search found 7 matches

by wizardchess
Oct 09 2020 5:42pm
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

CA3 speed/watt limits cause unreliable operation

As of a day ago, I've run into an inexplicable issue where the watt limit is active even though the CA shows the motor watts are far below the limit I have set (1500W). Trying to engage the motor via PAS never gets the motor above 300W, even with the PAS level maxed. Prior to this happening, I could...
by wizardchess
Oct 09 2020 5:10pm
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

Re: Cycle Analyst/Baserunner limits motor power at random

i wonder if you get the phaserunner suite in your smart phone and check it on the road with your phone instead of laptop? This ended up being the solution. I already had an OTG cable, just had to pull out the baserunner and run the TRRS cable through the frame into it, then put it all back together...
by wizardchess
Oct 04 2020 4:07am
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

Re: Cycle Analyst/Baserunner limits motor power at random

ZeroEm wrote:
Oct 03 2020 9:20pm
you will need to monitor the temp of the baserunner, the CA will not show baserunners thermal roll back.
I explained in another post that the baserunner isn't accessible and can't be monitored. It takes roughly 5 - 10 minutes of disassembly just to get access to it.
by wizardchess
Oct 04 2020 3:53am
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

Re: Cycle Analyst/Baserunner limits motor power at random

goatman wrote:
Oct 04 2020 12:50am
what voltage is your pack? do you have the z9 or L10 baserunner

https://www.ebikes.ca/product-info/baserunner.html
52V. Z9, but I'll be upgrading it to the L10 in the future.
by wizardchess
Oct 03 2020 8:58pm
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

Re: Cycle Analyst/Baserunner limits motor power at random

Whats the temperature on the baserunner? If it goes into thermal rollback it will cut the power without showing it on the cycle analyst screen. If it is accessible, try to get a temp reading of the metal part on the baserunner, or at least a feel with your hand. Not sure how much it would take, but...
by wizardchess
Oct 02 2020 11:39pm
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

Cycle Analyst/Baserunner limits motor power at random

I'm trying to troubleshoot an inconsistent issue where I can't get much more than 500W going into the motor after riding for several miles. Phase amps is set to 50A on the baserunner, CA battery current is set to 25A and watt limit is set to 1500W. I can reliably pull around 1300W before the amp lim...
by wizardchess
Oct 01 2020 9:18am
Forum: E-Bike Technical
Topic: Cycle Analyst/Baserunner limits motor power at random
Replies: 11
Views: 322

CA3 shows incorrect speed

This is my first build, so I expect I've configured something incorrectly, though I haven't figured out what yet. In short, I have a CA3 connected to a baserunner connected to a Bafang G60. When the wheel is on the ground/under load, the speed is incorrectly detected as being over 100 - 300MPH. Once...