Endless Sphere

I want to make the correct settings. what do these parameters mean in each window? how do they work? 2.jpg I do not know what F, U, and D are, but i have figured out the others through testing. IO sets up the assigned function/wire for Output only, like the hall or RPM line. The SW sets the assigne...

Please help to customize the function in the picture? I want to set the "Speed limit" using the programmable buttons, but I don't know which wire to use to enable it? Does anyone know how to connect correctly? Low medium high mode is not suitable as these modes limit the torque and the sp...

Please help to customize the function in the picture? I want to set the "Speed limit" using the programmable buttons, but I don't know which wire to use to enable it? Does anyone know how to connect correctly? Low medium high mode is not suitable as these modes limit the torque and the spe...

Thank. Unfortunately, I do not have such a wire (Apparently not every controller has an external temperature sensor

What do you think the display can be used to correctly display the speed, voltage and operating mode of the controller? I want to see the low average and maximum power mode, but I do not know which display will work. also i can't find the wire for the external temperature sensor, can you help me? Ho...

Can you please tell me if I can use 3 modules 0-140 volts for serial connection? I need about 400 volts to charge the 96S battery.. I am worried that the diode bridge or output transistor may burn out

different versions are sold in China, it sounds strange but em100s can have several modifications, usually it is 100 amperes, but I have a 150 ampere version, it was model em100s-72350. Battery is original l1e 2020

Today I managed to configure the controller, the problem was that the controller incorrectly determined the voltage, 10 volts below the real value, this triggered the overcurrent protection. I changed the value manually and the controller is delivering 140 amps of battery current. The bike is now ve...

Today I managed to measure the current on my surron motor, Votol em100s controller. the maximum battery current was 48 amperes, and the phase current was -197 amperes. this is significantly lower than I expected. the settings are set to the maximum current, but the speed is limited to 25 percent. wh...

Hi guys. Excuse my English, I use a translator. Has anyone used Chinese Votol controllers? Yesterday I connected the EM100S http://www.votol.net/en-us/controller/26.html controller to my Surron, it is written that this controller can 140 battery current and 350 ampere phase current. According to my ...

I have an EM100C (72350) controller, unfortunately I can't set it up to work well with my Surron bike motor (5 pair). At low revs, it works well, but as the accelerator increases, the current rises, the revs drop, the rotor starts to heat up. I have tried changing the degrees of the halls, however,...

I have an EM100C (72350) controller, unfortunately I can't set it up to work well with my Surron bike motor (5 pair). At low revs, it works well, but as the accelerator increases, the current rises, the revs drop, the rotor starts to heat up. I have tried changing the degrees of the halls, however, ...

Hi guys, I’m sorry if my english is wrong, I’m using a translator. Can you please, is it possible to configure the controller EM100S in the engine speed control mode and not power? I really like it when the engine has maximum torque at low revs, as it is implemented in Bafang BBS HD motors . If poss...