Endless Sphere

Does it need to be that brand? Why not just any 48v lion plug it right in

Awesome!

I have one pack made with bms leads but no bms, the clip was damaged and I just replaced with another pack. 115+shipping(cost of cells and rivets)

I'll try and answer all the questions in one post. They are the same sells from the link above. Idid I pay roughly 5$ a cell after shipping when I purchased 400 of these in hopes of one day putting them all together for my ev(400v 400a) I have since changed ideas on the car and am trying to sell. I ...

I stand corrected these are lion pouches. Ty

3.7v nominal cells

Hello I have a few 20s batteries made out of 8ah lithium phosphate pouches. Pouch has a continuous discharge of 200a with a 100a bms installed. Charge rate up to 100a. I built these for riding to work on my ebike with a 10amp charger built into my bike to charge battery in less than an hour. Spim08-...

synics wrote: ↑

Dec 24 2020 2:13pm

is this a 273 or 205 motor? My 273 hits 45 mph as per gps on a road straight away. https://youtu.be/LJEx6iZzZX0

Only 45? I hit 70 on my 205

Yes add key switch inline to either of those pins in the picture above. If you want display delete then short them together. Do not short them together and try to run display. If you want display and key switch run the key inline on either of those pins I buy juul extension piece and cut it open and...

Information 3 wire plug also must be disconnected for info to send through. Good luck on your adventures.

New computer so on the new sabvoton 72200. Looks identical. From qs motor site is the new one. Are you selecting the correct driver for your computer to read your bike in the program? You could be outputting to wrong drive....it took me awhile to get it.

Just hit me up if you need help getting key to work. But it uses the bottom two pins near the flat plastic piece

You guys are making this extremely way to difficult. The ignition wire is built into the display harness with the power button. You can add a keys switch to the power to the display so your controller won't turn on. That can be done with buying an extension piece and adding a simple key switch. Wate...

There is a new version of the app. Two of them going around but one is new and will save settings and also work with the 0-5v potentiometer for ebrake on the new controller setup only through usb and the new app that looks like the old, bluetooth and the old identical computer app will not save and ...

Your current reduce setting is set to reduce current after bike is at 80v. That's like 80% juice left and your bike tells itself to reduce power because battery is low. Private message me if you want some real help with controller and settings

I have 72200 and hit 70mph under 5 sec. Pm me your settings on mqcon app. Do you have the new version with variable regen w/o second throttle?

I would build you a bike to trade but I'm in Missouri. I purchased frames from this manufacture when they were in the prototype of that frame

Location?