Endless Sphere

I different problem with the setup is that I have been getting some strange power offs lately. When pedaling along normally I go over, for example, a curb and similar obstacle, the power cuts off. When coasting down a trail for example, everything is fine. Only when the motor is powered this happen...

Try lowering "Pedalec Positive Motoring Torque Ramp (ms)" to 50 ms. Thanks for the answers.. I already have the "Pedalec Positive Motoring Torque Ramp (ms)" set to 50ms.. I try today change the "Pedalec sensorless open loop frequency ramp time" from 300ms to 100ms and ...

Ok, here are my latest settings. They are working pretty well. I can't get the overcurrent fault to trigger any more. I've highlighted what I think is important. I changed the sensorless settings, but I am still using sensored start and sensorless run, so I don't think those settings actually matte...

do you mean your RC Charger can charge all 16s at once, or charge each 4s pack separately ? if you're not concern short circuit protection, imbalance cell protection / cell under-voltage on high current discharge cycle, cell over-voltage due to re-generative, you don't need NEPTUNE 20 ! Going to ch...

Hello I'm building an ebike with a cyc x1 pro motor (with bac855 controller max rated power 3000w) and with a 16s lipo battery (4x4s 8000mah batteries in series, 30C rating). I'm planning to charge the batteries with my rc lipo charger, in parallel. The charger has a balance function and the control...