Search found 32 matches

by TerrySavace
Aug 24 2021 10:31am
Forum: EBike Non-hub Motor Drives
Topic: Kuberg Freerider Motor
Replies: 4
Views: 286

Re: Kuberg Freerider Motor

Have contacted lighting rods, he has said that he is unsure if the motor will run as its not been tested before.... I guess a question I have is - is it possible for an ESC that has been configured to run one motor, run another with no configuration update, if the other motor is close enough to the ...
by TerrySavace
Aug 24 2021 6:26am
Forum: EBike Non-hub Motor Drives
Topic: Kuberg Freerider Motor
Replies: 4
Views: 286

Kuberg Freerider Motor

Hi all, I need a Kuberg Freerider Motor however brand new they are 1k, and impossible to find used. Anyone know of any other motor that will just "work" with an existing 12kw controller? Dont really want to replace the controller so i guess a replacement non OEM motor would have to be near...
by TerrySavace
Aug 24 2021 5:04am
Forum: Items Wanted
Topic: Kuberg Freerider motor
Replies: 0
Views: 134

Kuberg Freerider motor

Does any one have a Kuberg Freerider motor spare, either used or new and would be willing to sell it?

many thanks

Terry
by TerrySavace
Aug 06 2021 4:40am
Forum: EBike Build Threads
Topic: Kuberg freerider 2.0
Replies: 46
Views: 2794

Re: Kuberg freerider 2.0

Also i noticed you replaced the bearings previously, which brand did you use? Do you know what spacers are used? Mine are a bit rusty for some reason and I want to replace them!

Thanks again
Terry
by TerrySavace
Aug 06 2021 2:26am
Forum: EBike Build Threads
Topic: Kuberg freerider 2.0
Replies: 46
Views: 2794

Re: Kuberg freerider 2.0

Thanks for the case sizes - I have a used freeride i have purchased, not in great condition and a few parts need replacing. Debating building my own battery also to increase range so need a case, its possible I could just have a spare battery and make the battery easily swappable. Where are you base...
by TerrySavace
Aug 06 2021 2:23am
Forum: EBike General Discussion
Topic: Kuberg Freerider - replacement parts
Replies: 0
Views: 108

Kuberg Freerider - replacement parts

Hi all, Just got myself a used 12kw Freerider, need to replace some parts on it, does any one know where i can source spares in the UK? I have found a site that has what i need but they dont ship to the UK :( Below is what i need, probably over priced and could possible source some of the parts else...
by TerrySavace
Aug 02 2021 7:03am
Forum: EBike Build Threads
Topic: Kuberg freerider 2.0
Replies: 46
Views: 2794

Re: Kuberg freerider 2.0

Ian

What would you want for the bike as is? Im based in Hampshire UK


Does nay one have the battery case sizes at all? Looking to build my own battery for my other Freerider

Terry
by TerrySavace
Jul 30 2021 4:11am
Forum: EBike Build Threads
Topic: Kuberg freerider 2.0
Replies: 46
Views: 2794

Re: Kuberg freerider 2.0

IS this still for sale? Interested in it if so
by TerrySavace
Jun 04 2021 9:54am
Forum: Items for Sale - New
Topic: NYX Bikes Carbon fibre bike question
Replies: 2
Views: 270

NYX Bikes Carbon fibre bike question

Does anyone know if NYX Bikes are still going? Does anyone have any experience with the bike? My front stem seems to have a bit of a wobble on it, only VERY slightly, but wondering if it can be fixed. I got the bike used a couple of years ago and has been solid since buying it. The works I have are ...
by TerrySavace
Jun 03 2021 5:07am
Forum: Bike Mechanical & Structural
Topic: Adaptto controller question
Replies: 2
Views: 208

Re: Adaptto controller question

Thanks for the response! Terry
by TerrySavace
May 31 2021 12:41pm
Forum: Bike Mechanical & Structural
Topic: Adaptto controller question
Replies: 2
Views: 208

Adaptto controller question

Hello

I purchased a bike with a adaptto controller on it. The battery needs replacing - will removing the battery completely wipe the configuration from the controller or am i safe to do it?

Thanks in advanced!

Terry
by TerrySavace
May 13 2021 1:56pm
Forum: Battery Technology
Topic: ANT BMS QUESTION - please help!!
Replies: 8
Views: 409

Re: ANT BMS QUESTION - please help!!

Well, thats a poor design! I best charge it up soon :D
by TerrySavace
May 13 2021 9:36am
Forum: Battery Technology
Topic: DIY surron 72V battery build (my first battery build)
Replies: 11
Views: 1717

Re: DIY surron 72V battery build (my first battery build)

Thanks for the reply. I did not test the nickle strips, the comments on the amazon seller were all good, saying people had tested them and they were 99% pure nickle... I have some left i did not use and will test those tonight. Fingers crossed it works!!! The welder did seem to do a good job. I coat...
by TerrySavace
May 13 2021 9:27am
Forum: Battery Technology
Topic: ANT BMS QUESTION - please help!!
Replies: 8
Views: 409

ANT BMS QUESTION - please help!!

All, I have an ANT BMS connected to a 72Volt battery. I have left it plugged in for a couple of weeks, just checked it today and it seems the first cell (#1) is being drained faster than the rest? I have attempted to do a manual balance and it doesnt seem to be making it any better. Any idea why its...
by TerrySavace
Apr 09 2021 10:13am
Forum: Battery Technology
Topic: First Battery Build 21700 Molicel P42A
Replies: 73
Views: 3604

Re: First Battery Build 21700 Molicel P42A

Just fitted the same BMS to my first battery build - once you have switched on the BMS using a battery, you need to short the wires together to keep the BMS "on" - its actually on as the hours "on" still tick up - but the bluetooth seems to drop. So switch it on using a 3.5V or w...
by TerrySavace
Apr 08 2021 3:32pm
Forum: Battery Technology
Topic: DIY surron 72V battery build (my first battery build)
Replies: 11
Views: 1717

Re: DIY surron 72V battery build (my first battery build)

Well - heres an update. used epoxy on the nickle strips to secure them down. BMS installed and working. Next steps - connect main B negative to ant BMS - connect QS8 connector to main positive and the other side of BMS. Connect XT60 charge wire. Create a case. Fit BAC8000 and connect battery :D spot...
by TerrySavace
Apr 04 2021 2:46pm
Forum: Battery Technology
Topic: DIY surron 72V battery build (my first battery build)
Replies: 11
Views: 1717

Re: DIY surron 72V battery build (my first battery build)

Does anyone know the size shrink wrap I would need to wrap this battery?

Thanks

Terry
by TerrySavace
Mar 25 2021 3:59pm
Forum: Battery Technology
Topic: DIY surron 72V battery build (my first battery build)
Replies: 11
Views: 1717

Re: DIY surron 72V battery build (my first battery build)

Hmm, Mine seem to be stuck down quite well - I'm only using it to 1/2 charge then re-charging it (i know the power prob comes from capacitors not direct from the bat but thought id charge it anyway)- but think ill do what you have suggested also as it will be getting chucked about abit inside the su...
by TerrySavace
Mar 25 2021 1:08pm
Forum: Battery Technology
Topic: DIY surron 72V battery build (my first battery build)
Replies: 11
Views: 1717

DIY surron 72V battery build (my first battery build)

Hi all, I managed to obtain 200 unused "new" cells quite cheap (£1.20 each) so I have decided to undertake a battery build for my surron. They are Samsung 25r 20A 2500AH cells. They had been previously spot welded but all previous nickel removed. They were originally purchased from fogstar...
by TerrySavace
Mar 25 2021 5:49am
Forum: Motor Technology
Topic: Roman Kostrygin - Sur-Ron 16kw outrunner
Replies: 69
Views: 10998

Re: Roman Kostrygin - Sur-Ron 16kw outrunner

What happened with these motors? Id like to get an upgraded motor at somepoint :D
by TerrySavace
Mar 19 2021 6:05am
Forum: EScooters/EMotorcycles
Topic: Sur-Ron - New Mid drive Bike
Replies: 5551
Views: 660796

Re: Sur-Ron - New Mid drive Bike

@smdub - could you link me to the type of polycarbonate you used for your OSET battery? @Hawaiiguy - ill take a look at the G10 stuff. Proper nightmare this is Im going to contact a metal smith today from the town i live in, and see the cost on getting a box welded together, have 3d printed a test b...
by TerrySavace
Mar 18 2021 2:44pm
Forum: EScooters/EMotorcycles
Topic: Sur-Ron - New Mid drive Bike
Replies: 5551
Views: 660796

Re: Sur-Ron - New Mid drive Bike

So, im building my own 72V battery for a surron - I need a case to put the battery in, does anyone know anywhere you can just buy after market surron battery cases? or any 3d printed STL files ?

Or where i could buy an empty surron battery case?


Thanks all

Terry
by TerrySavace
Mar 14 2021 12:16pm
Forum: Items for Sale - New
Topic: ASI BAC Controllers Worldwide Vendor
Replies: 184
Views: 25965

Re: ASI BAC Controllers Worldwide Vendor

Do you have ASI BAC8000 with surron kit? Assume surron kit is cables & mounting bracket? IF so what price and availability to the UK
by TerrySavace
Mar 07 2021 4:59pm
Forum: Items Wanted
Topic: 18650 Suppliers
Replies: 3
Views: 416

Re: 18650 Suppliers

Thanks for the response
by TerrySavace
Mar 07 2021 2:12pm
Forum: EBike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5195
Views: 651256

Re: Adaptto Mini-E/Max-E Owner's Thread

Ignore me - found it !!