Search found 3 matches

by Mocha2021
Apr 06 2021 5:57am
Forum: EBike Troubleshooting
Topic: Stromer ST2 - drive error code 0X210002
Replies: 5
Views: 215

Re: Stromer ST2 - drive error code 0X210002

Hello, Thank you Firedog for all your inputs. I just realized that by testing the Hall Sensors without a controller and just a 5VDC power supply required pull up resistor to get a reading from the transistor. Once i added 10K ohm to the circuit, all the hall sensors are working properly. So the hub ...
by Mocha2021
Apr 04 2021 6:50am
Forum: EBike Troubleshooting
Topic: Stromer ST2 - drive error code 0X210002
Replies: 5
Views: 215

Re: Stromer ST2 - drive error code 0X210002

Hi, Thank you. I checked all CAN bus node connections and point to point on all wiring to the motor. No problem found on connectors. I did see a blue wire that come down to the hub motor had a knick on it and was exposed. That may have shorted the controller board. When I follow the cabling, it came...
by Mocha2021
Mar 29 2021 6:07am
Forum: EBike Troubleshooting
Topic: Stromer ST2 - drive error code 0X210002
Replies: 5
Views: 215

Stromer ST2 - drive error code 0X210002

Hello, I hope someone here can help me. I purchased a used Stromer ST2 that has less than 120 miles on it. It has the latest update on firmware. The bike is a 2016. It is no longer under warranty. Took it out for a ride and as soon as the power is applied to the Omni display, i encountered a drive e...