Search found 9 matches

by 2Phast2Delirious
Sep 07 2022 1:22pm
Forum: Stand-up EScooter/ESkateboards
Topic: Uber scoot 36v 1000w wiring
Replies: 6
Views: 364

Re: Uber scoot 36v 1000w wiring

I have the complete wiring harness from an 36v UberScoot 1000w project. Comes with the headlight + tail light harness and tail/brake light. PM for more info
by 2Phast2Delirious
Sep 02 2022 12:44am
Forum: Stand-up EScooter/ESkateboards
Topic: eZip 750 overvolting 24V->36V?
Replies: 32
Views: 9962

Re: eZip 750 overvolting 24V->36V?

Just a friendly note: Hopefully your information will be useful to anyone reading this thread in the future...but the participants in the thread haven't been back for almost a decade. ;) Since you mentioned that it is flat streets, I would change the motor sprocket to a slightly bigger one before I...
by 2Phast2Delirious
Aug 15 2022 7:00pm
Forum: Stand-up EScooter/ESkateboards
Topic: trigger/finger throttle replacement question
Replies: 3
Views: 273

Re: trigger/finger throttle replacement question

It might be necessary to verify the wiring and make sure the colors match. Some manufacturers rearrange their pins so only their throttle is plug-and-play compatible. It is best to buy the controller + throttle combos. I hope this helps.
by 2Phast2Delirious
Jun 15 2022 6:48pm
Forum: Stand-up EScooter/ESkateboards
Topic: Uber scoot 36v is 1000w
Replies: 7
Views: 1908

Re: Uber scoot 36v is 1000w

Hi, can my Uberscoot 36v 1000w controller handle 48v lithium? Should be able to but you will lost the low voltage cut off protection for you battery. Just watch for it. Bty brush motor controller are cheap But even with the 48v set up you still be only running max speed at 21x1.25mph. roughly 26mph...
by 2Phast2Delirious
May 25 2022 2:57pm
Forum: Stand-up EScooter/ESkateboards
Topic: Uber scoot 36v is 1000w
Replies: 7
Views: 1908

Re: Uber scoot 36v is 1000w

Yeah, then you're going to have to upgrade the electronics - battery/controller/motor. You might be able to squeeze more out of the motor, so at least controller/battery. You will probably want to overvolt, to 48v, (at current gearing, will give you same torque but more top end) which means you'll ...
by 2Phast2Delirious
May 05 2022 12:06pm
Forum: Stand-up EScooter/ESkateboards
Topic: My Custom 1500w Schwinn Stealth S750 Build
Replies: 3
Views: 556

Re: My Custom 1500w Schwinn Stealth S750 Build

Full suspension is the way to go, here the cracks in the multi-use pathway can be quite large so it looks to be a great scooter in that way, the only thing I dont like about it if it was my S750 1500w Schwinn is the raised rear end, I wouldnt even use the seat but at 1500w scooter, should be a blas...
by 2Phast2Delirious
May 04 2022 12:25am
Forum: Stand-up EScooter/ESkateboards
Topic: My Custom 1500w Schwinn Stealth S750 Build
Replies: 3
Views: 556

My Custom 1500w Schwinn Stealth S750 Build

I've decided to split ways with my all-time favorite scooter and wanted to showcase some of my CLEANEST Schwinn builds ever! This rare Schwinn S750 electric scooter is built like a tank, rides like a miniature high-end ebike and is small enough to fit in most car trunks. The seat post may be removed...
by 2Phast2Delirious
Mar 17 2022 12:42pm
Forum: Stand-up EScooter/ESkateboards
Topic: First post: Schwinn stealth S1000 mods
Replies: 21
Views: 6240

Re: First post: Schwinn stealth S1000 mods

I have a rigid schwinn 750 rusting in the garage that I got as part of buying another scooter. Mind sharing some more details on the hub motor set up? I was contemplating doing a hub set up as a chill cruiser since my other projects are aiming for a higher "pucker factor" as I like to cal...
by 2Phast2Delirious
Mar 16 2022 4:04pm
Forum: Stand-up EScooter/ESkateboards
Topic: First post: Schwinn stealth S1000 mods
Replies: 21
Views: 6240

Re: First post: Schwinn stealth S1000 mods

Sorry for resurrecting this thread, but does anyone still own these? Here are my three Schwinn Stealth S2000 electric scooters. Schwinn Stealth S2000 Direct Drive (no chain) 48v 2000w Schwinn S750 (chain-drive) running 48v 2000w Schwinn Fusion 1000 converted to a 48v 2000W brushless hub motor (2WD o...