Search found 867 matches

by Animalector
Feb 21 2019 3:03pm
Forum: E-Bike Non-hub Motor Drives
Topic: My Bafang Ultra Mountain Bike! Frey AM1000
Replies: 1748
Views: 245283

Re: My Bafang Ultra Mountain Bike! Frey AM1000

Tsdz2. Torque sensor bolt on very awesome
by Animalector
Feb 20 2019 7:11pm
Forum: Items for Sale - New
Topic: FREY eMTB with Bafang m600 is developing with your ideas!
Replies: 353
Views: 39003

Re: My Bafang Ultra Mountain Bike! Frey AM1000

cost.. suspension is expensive. otherwise I agree...
by Animalector
Feb 11 2019 6:35pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

I haven't actually ridden the m600 yet. But I owned and thrashed the previous 350w torque sensor model on an enduro bike and I am confident that it was "right up there" with the likes of Bosch and Shimano. The torque control was excellent, very natural feel, good torque and much quieter than the Shi...
by Animalector
Feb 09 2019 9:47pm
Forum: Battery Technology
Topic: Ultra Cheap 66160 30Ah LTO - Or Scam?
Replies: 42
Views: 8465

Re: Ultra Cheap 66160 30Ah LTO - Or Scam?

Sounds good where can I get them.

Edit....

Sorry I read back through the post. I had already asked. Haha
by Animalector
Feb 07 2019 9:44pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

no bearings either, you can see some sort of plastic bushings on all linkage pivots. I doubt it will last considering the places you can go with an ebike. There is a plus side.. If the bike is cheap enough, rip the drivetrain, bars, grips, gears, wheels and M600 motor off of that frame, and put it i...
by Animalector
Feb 02 2019 4:48pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

well I don't actually have a bike yet. it's still a work in Progress. Soon... When I went to China I visited Enwe Cycles, who were joint venture in producing this model with Dengfu, Alex had a 3d Printed model of your bike built up on display which I could check out (but not ride). It looked great, ...
by Animalector
Feb 02 2019 12:02am
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

The battery that they are using in the Dengfu bike is not a "Bafang" battery, they are using a battery from another manufacturer. The battery and mounts that come from bafang look like this: battery (Medium).jpg battery_mount (Medium).jpg I agree it's tough getting the point across, it takes time......
by Animalector
Jan 14 2019 3:36pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

The other two are comms. I think canbus but I need to check my correspondence.

Andy
by Animalector
Dec 27 2018 4:43pm
Forum: Battery Technology
Topic: Samsung 40T - 35A 21700 Li-ion battery's capacity test
Replies: 13
Views: 2115

Re: Samsung 40T - 35A 21700 Li-ion battery's capacity test

I see the problem, but I guess the whole point of these tests was to show the different performance at different current draw. His setup didn't change, so we can still get useful information from the results. Technically perfect? No.. but useful.. yes.
by Animalector
Dec 24 2018 1:48am
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

nice work getting it ready to ride again! enjoy. I'm keen for some 3rd person vids ;-)

Andy
by Animalector
Dec 23 2018 3:15pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

I shouldn't laugh but that's actually pretty funny. They make moulds, tools, carbon parts, but can't solder the red wire on properly... The plus side is (because there's always a plus side)... You can now fix it properly and do the other wires while you're at it. And you will know that it is all don...
by Animalector
Dec 23 2018 2:08am
Forum: E-Bike Non-hub Motor Drives
Topic: GNG / CYC X1 Pro 3000w
Replies: 472
Views: 68595

Re: GNG X1-pro 3000w

maybe the drive gear is smaller on the direct drive vs the chain drive, thus overall same ratio? I don't know for sure but this is certainly possible .. and makes sense.
by Animalector
Dec 23 2018 2:05am
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

From your description, it seems to me like the issue was at the XT 60 connector (ie if you cut it off, then measure the wire end to the pins and it is ok, the issue must have been with the bit you cut off) was there any way to inspect the rear of the XT60 or was it gooped up? It's possible they have...
by Animalector
Dec 21 2018 5:07am
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

My guess is a bad solder joint on the back of the XT60 or down at the connection point on the receptacle. Probably easier to open it up and re-solder it, rather than waiting weeks for a replacement??
by Animalector
Dec 18 2018 5:55am
Forum: Battery Technology
Topic: 18650 spot welding -how to- ULTIMATE REPOSITORY
Replies: 759
Views: 173566

Re: 18650 spot welding -how to- ULTIMATE REPOSITORY

shit that is expensive, I think I paid lie $10USD for a couple of meters of the Blue stuff from China (Aliexpress) big diameter for 13S4P packs.
by Animalector
Nov 21 2018 10:12pm
Forum: E-Bike Non-hub Motor Drives
Topic: My Bafang Ultra Mountain Bike! Frey AM1000
Replies: 1748
Views: 245283

Re: My Bafang Ultra Mountain Bike! Frey AM1000

Adrenaline pumps up the heart rate 😀
by Animalector
Nov 20 2018 2:49pm
Forum: E-Bike Technical
Topic: Using crankset with ANT+ powermeter as PAS
Replies: 4
Views: 764

Re: Using crankset with ANT+ powermeter as PAS

My first thought was a bolt on load cell. With a Bluetooth link to a DAC for 0to5v output. But really you also need to know rotation. Torque alone doesnt cut it. What if you're standing on the pedals? Of course you could put a sensor on both crank arms but twice the cost and complexity. Maybe it's b...
by Animalector
Nov 19 2018 10:17pm
Forum: E-Bike Technical
Topic: Using crankset with ANT+ powermeter as PAS
Replies: 4
Views: 764

Re: Using crankset with ANT+ powermeter as PAS

Sorry to dig this up.. but I've been thinking about this.. There are many new power meters on the market, I saw one the other day discounted to around $200AUD. which would make an awesome Torque based throttle. Before i get into it, has anyone got any ideas like this, or reasons why it wouldn't work...
by Animalector
Nov 18 2018 5:24pm
Forum: E-Bike Non-hub Motor Drives
Topic: My RC Mid Drive with Single Stage Reduction
Replies: 351
Views: 44741

Re: My RC Mid Drive with Single Stage Reduction

Shorted phase wires.. you went to turn it but it wouldn't turn. So you thought it was stuffed. But it wasn't...

Andy
by Animalector
Nov 14 2018 9:28pm
Forum: E-Bike Non-hub Motor Drives
Topic: Feiwel 27.5+ Bafang M600 Dual suspension emoutain bike
Replies: 8
Views: 1339

Re: Feiwel 27.5+ Bafang M600 Dual suspension emoutain bike

Geometry looks pretty shaky
I agree, the geometry looks very long and steep. Also another gotcha, is whether they use bushings or bearings in the rear linkages. they don't always use bearings by default.

I'd pass on this one.

Andy
by Animalector
Oct 30 2018 8:37pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

Hmm I can't see any reason why the battery will have any impact on the use of a throttle. It is true that the battery will have CANBUS and UART connections and +5V for a total of 7 pins, Maybe the Throttle is getting the +5v supply from the battery...

Andy
by Animalector
Oct 30 2018 5:42pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

yes I as referring to the battery in the video. it looks like this one: http://www.reention.com/product/detail/47 which is nothing like the internal bafang battery BT F03-450 EN15194 is the European standard for Pedal Assist Bicycles (PAS). I don't know exactly what changes they are making, but it's...
by Animalector
Oct 30 2018 5:17pm
Forum: E-Bike Non-hub Motor Drives
Topic: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)
Replies: 297
Views: 35981

Re: Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

That's not the bafang battery it's a battery like Frey use..

I heard that Bafang were making changes to the battery to comply with EN15194 and that November they will have the batteries available.

Andy
by Animalector
Oct 18 2018 11:08pm
Forum: E-Bike Non-hub Motor Drives
Topic: Carbon Fiber e bike with Bafang M 600 mid installed with throttle
Replies: 161
Views: 22792

Re: Carbon Fiber e bike with Bafang M 600 mid installed with throttle

Drop Dead Fred wrote:
Aug 13 2018 11:51pm
Tripped across another one today. Sent an email for more info will post when I get it....
Image
Supposed to be 150mm travel and 27.5 x 3.0\29 x 2.35 and weight is 3350g or 7.39 pounds
Where did you find this one???

Thanks