Endless Sphere

Woha... Lenk back from the dead. Where you been man? ...... had incorporated at tiny 4V - 150V DC-DC on the BMS PCB... but requirements came down the pipe to support higher voltages... and above about 150 the windows for acceptable range tighten. im around :D what you've described above is what i w...

Dunno. whattabout "tapping" the equivalent of 12-13.7 volts out of a through bms utility where consumption is lower than a couple of amps? build the utility into the bms with a 12v out put. activate it either switched or CAN. would take up less space than a small buck anything requiring bi...

This is a 19" steel cruiser fat bike frame. Purchased from ebay over the winter to build up, but have decided to abort. Frame shipped with some "light" damage to the rear drop outs and hanger - they're out by about 2-4mm. Didnt worry too much about it because the bike was scheduled fo...

BTW, OT for this thread, but since it does have something to do with the advertising/vendor/etc issue; I've debated posting it as a separate topic, and will split it off if y'all think that would be better: I think that no moderator should be allowed to be a vendor and vice-versa. If they are selli...

matt,

impeccable. any info on that back rim? 36h? double wall? Eyelets? where can they be found?

Thanks,

len

AFT.

Good Luck Thorin!

Be sure to send me all your video footage again!

Len

http://i1027.photobucket.com/albums/y331/sean_edmondstone/944F8109-4750-4530-B689-2F391C74BCD1_zpsgi6pra6q.jpg 219 Gokart sprocket carrier. only $50AUD, would be a good way for someone to go a Gokart chain on a bike. all you need is a 6 bolt iso hub (flip flop fixie style) Nice work! Can you provid...

Aargh.

Any of the founding fathers of this thread have a splined freehub broached freewheel laying around in their tool boxes before I start hand filing one?





len

why?

new article.

http://dirtragmag.com/elephant-in-the-r ... ntroversy/

get a shovel and show up at our next imba sponsored trail work day!

len

As an experiment, I laced up a second wheelset for my fatbike. I used a set of fat hubs, laced to a set of 29er rims - Halo Vapour. vapour.jpg Running a 29X2.3 tire, the diameter is only 3/8" shorter than its 26X 4.0 fat wheel/tire combo. had it in my head I was going to use this second wheelse...

....... but it's also the absolute disgust i've developed for the effect of salt on the bike..... corrosion. never. sleeps. The bane of east coast two wheeling commuters in ice melt (salt), rust belt wintry months. Every night when I get home the bike gets rinsed off. Immediately. Only real solution.

its 11 degrees here and about 3 inches fell on the streets a few days ago. I had to be at the shop by 9 am, and every road in bound to Pittsburgh was literally bumper to bumper for miles. cars in the ditches, sliding, crashes, untreated road ways. I bought my fat bike specifically for these types of...

137.5mm

http://www.jbi.bike/web/checking_produc ... mber=17157


gotta know where to look.....

Lenk42602 did u reuse the spindle from the bottom Bracket with your new origin 8 one? hey dan, I purchased a sealed cartridge unit, so no slop to worry about. By the way I ended up promptly taking my dolomite back to Target long ago, and I still have the sealed bb I you want it. In the end, I think...

I wouldn't underestimate the MIT think tank and there intended customers. Young, professional, or from wealthy backgrounds, urban living, progressive, born in the smart phone/digital media age, no car but want an alternative to public transit for city travel, wants transport that doesn't mess up the...

Anyone know of a larger chain ring for this thing? dan, that crankset has a pinned chain ring on it. they are not designed to be replaced, rather thrown out when worn sufficiently. Any square taper crank should do you just fine. Chain line will need to be considered though. Another thing - did I mi...

Range -

I have a 12.5 Ah pack and can squeeze just under 40 miles out of it.

Mostly setting 2-3, with few max PAS shenanigans

commuting on pavement and about 30% dirt roads...

no throttle hooked up either...

Len

I am a trail steward for one of the many county parks maintained by a multi use( but primarily mountain biking) IMBA certified organization. It also happens to be Dirt Rag's back yard. There was a time when mountain bikers were perceived as outlaws, crashing through the woods, destroying the land, e...

How many e-mountain bikers here have actually showed up at a trail work or maintenance day in their area and picked up a shovel and helped out ?. just curious This is the beginning of a responsible approach to gaining accepted use on trails just as any other group has in the past. Keeping trails mai...

posted earlier this year:

http://endless-sphere.com/forums/viewto ... =3&t=62179

Len

It works both ways you know lastearth had also 1 post when he is prasing HPC and he was called shill by other members immediately. So it is very personal how you feel, real, fake .... so it works both ways. I THINK negative experiences described here HPC are real. Do you have any experience with th...

Well, I have purchased a battery and charger from them. battery shipped quickly and has worked impeccably since mid year. Guys on the phone were nothing but helpful, product showed up. No drama whatsoever. Caveat emptor. Anybody that signs up to our forum and makes a slanderous first post about a ve...

ha! funny.

at least you had your best friend with ya!

She must have been wondering if you had completely gone mad....