Search found 480 matches

by beto_pty
Dec 25 2014 11:35pm
Forum: Stand-up E-scooters and E-skateboards
Topic: 3D printed parts Depository
Replies: 178
Views: 23372

Re: 3D printed parts Depository

flashforge rocks! defnnitly recomend it
by beto_pty
Dec 22 2014 3:53pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Boosted 'hacked'
Replies: 12
Views: 1844

Re: Boosted 'hacked'

Anything around we should avoid riding near with the wii nunchuck? I'd avoid Market street Melbourne.... the rest of the planet should be fairly safe.. Id say we spend more time worrying about perhaps more inminent dangers... ...the amount of eboarders/escooters that ride without helmets.. ...or wa...
by beto_pty
Dec 22 2014 12:22pm
Forum: Stand-up E-scooters and E-skateboards
Topic: how do you custom builders keep track of battery percentage?
Replies: 9
Views: 1165

Re: how do you custom builders keep track of battery percent

The cheapest alternative is one of these ScreenHunter_64 Dec. 22 12.19.jpg They are under 4 bucks.. you set them at 3.8v and that roughly gives you a midway point.. so when it beeps you just set it to 3.1 and ride back.. Just be sure to check them when you turn on your board, cause if you become dep...
by beto_pty
Dec 22 2014 6:39am
Forum: Stand-up E-scooters and E-skateboards
Topic: 10S custom skate ESC: testers wanted!
Replies: 1520
Views: 222149

Re: 10S custom skate ESC: testers wanted!

This is going thonchange everything. ....
Also your English is excellent.
This works beautifully.
Great job man!
by beto_pty
Dec 20 2014 10:30am
Forum: Stand-up E-scooters and E-skateboards
Topic: Post Your Electric Longboard or Electric Mountainboard Build
Replies: 236
Views: 86719

Re: Post Your Electric Longboard or Electric Mountainboard B

awesome voodojar
great to see this take off.
congratulations
by beto_pty
Dec 19 2014 2:10pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Boosted 'hacked'
Replies: 12
Views: 1844

Re: Boosted 'hacked'

Hopefully this will not transform itself into legislation banning the use of wireless transmitters on e-vehicles for safety reasons... or (equally devastating) costly transmission/reception permit protocols to be complied by the (mostly kickstartered) tiny companies making e-vehicles. Lets see how i...
by beto_pty
Dec 18 2014 1:25pm
Forum: Stand-up E-scooters and E-skateboards
Topic: 3D printed parts Depository
Replies: 178
Views: 23372

Re: 3D printed parts Depository

Just as an update...
the stingray has passed her 200 kms use milestone..
the 3dprinted ABS 48tooth abec11 gear has gone 100 kms and shows no wear...
:P
by beto_pty
Dec 18 2014 12:28pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Destroyer 12s Urban Racer Build
Replies: 135
Views: 20811

Re: Destroyer 12s Urban Racer Build

LOL... yup that is next on my list...roadrash where the sun don't shine LOL.. :shock: awesome graph... OKP YUP that is the tradeoff... faster maximum speeds on flats at the cost of hill climbing ability... probably the sucks for Alps and our mountain friends.. but for me... living in a big tropical ...
by beto_pty
Dec 17 2014 3:36pm
Forum: Stand-up E-scooters and E-skateboards
Topic: E-board - Why everybody uses 6s on 10/12s motors ?
Replies: 20
Views: 2174

Re: E-board - Why everybody uses 6s on 10/12s motors ?

... Even if it is expensive I would buy one to use maximum power of the motor... You do understand to use the full power of the motor you must go about 70 kph? :shock: I don't think everyone knows that lol. Huminna wants to pull 2000 watts consistently. :shock: ...To stay under a safe 30 kph and pul...
by beto_pty
Dec 17 2014 12:37pm
Forum: Stand-up E-scooters and E-skateboards
Topic: E-board - Why everybody uses 6s on 10/12s motors ?
Replies: 20
Views: 2174

Re: E-board - Why everybody uses 6s on 10/12s motors ?

torqueboards wrote:Even if it is expensive I would buy one to use maximum power of the motor...
:
You do understand to use the full power of the motor you must go about 70 kph? :shock:
by beto_pty
Dec 16 2014 12:32pm
Forum: Stand-up E-scooters and E-skateboards
Topic: DIY Hoverboard
Replies: 7
Views: 1184

Re: DIY Hoverboard

sure I'll bite.. maybe a rocketpack? thrusters? if there is no friction with the floor we need to break newton's first law with something .. maybe the same thrusters.. maybe some like these ScreenHunter_62 Dec. 16 12.29.jpg https://www.hobbyking.com/hobbyking/store/__41695__Dr_Mad_Thrust_120mm_12_Bl...
by beto_pty
Dec 16 2014 9:42am
Forum: Stand-up E-scooters and E-skateboards
Topic: hdhd
Replies: 25
Views: 4855

Re: Yuneec E-go now at Fry's B&M stores

You comment on low power up over passes raises the issue that your current speed is perhaps a fucntion of available torque.. maybe the sensors are just to allow for standstill startups (which I feel look really goofy but that is maybe just me) If the board lacks the torque to go up overpasses with t...
by beto_pty
Dec 15 2014 5:11pm
Forum: Stand-up E-scooters and E-skateboards
Topic: -Banana Slug- Kick Scooter/Longboard
Replies: 9
Views: 1714

Re: -Banana Slug- Kick Scooter/Longboard

Nice board
Congratulations!

We need some videos!!!
(And some shirts that say Irresponsible parenting on them LOL)
by beto_pty
Dec 15 2014 3:08pm
Forum: Stand-up E-scooters and E-skateboards
Topic: hdhd
Replies: 25
Views: 4855

Re: Yuneec E-go now at Fry's B&M stores

well you got tot remember the first time you rode a board.. 12mph was probably as fast as you dared to go,,, .. but yes my 6 year old daugthers`scooter does 12mph... :shock: also it probably does 12mph on a full batt on flats.. towards the end you are probably looking at a neckbraking 9 or 10 mph? H...
by beto_pty
Dec 15 2014 1:00pm
Forum: Stand-up E-scooters and E-skateboards
Topic: New scooter build PATY-neta
Replies: 15
Views: 4724

Re: New scooter build PATY-neta

Cool..
Did you friction drive the motor or did you gear it?
by beto_pty
Dec 15 2014 10:06am
Forum: Stand-up E-scooters and E-skateboards
Topic: New scooter build PATY-neta
Replies: 15
Views: 4724

Re: New scooter build PATY-neta

Here is the diagram... just for anyone interested.. The output of the pot is the side with only one leg... the other side has 2 legs... This affects your top speed approximately halving it.. if you want the full top speed take out the pot and connect the sensors signal wire where the pot's single le...
by beto_pty
Dec 15 2014 6:11am
Forum: Stand-up E-scooters and E-skateboards
Topic: Deska Board city surf
Replies: 1
Views: 601

Re: Deska Board city surf

Looks awesome. .. Just checked and i have an extra sentilion lying around... and looks really cool will takea better look in my office...but it l9oks like a great candidate. .. edit: The motormounts might be tricky to weld on.. but probably doable.... however on the topside view the board looks wide...
by beto_pty
Dec 14 2014 8:48pm
Forum: Stand-up E-scooters and E-skateboards
Topic: New scooter build PATY-neta
Replies: 15
Views: 4724

Re: New scooter build PATY-neta

Cool...good for you :D
by beto_pty
Dec 14 2014 6:34pm
Forum: Stand-up E-scooters and E-skateboards
Topic: New scooter build PATY-neta
Replies: 15
Views: 4724

Re: New scooter build PATY-neta

Hi psyco Ill post a diagram of what i connected to what. .. It sounded a bit complicated till i tried it and it turned out to be pretty simple The scooter rocks and allows me to go out with the wifey or my daughter and still ride my motorized board... with the kickscooter i had to bring my kick boar...
by beto_pty
Dec 13 2014 4:37pm
Forum: Stand-up E-scooters and E-skateboards
Topic: E-board - Why everybody uses 6s on 10/12s motors ?
Replies: 20
Views: 2174

Re: E-board - Why everybody uses 6s on 10/12s motors ?

yup ..agree with torque.. as soon as vedders esc comes into play many of the rules will change but mainly for higher end/power users.. However for some one looking to build a cheap esc.. the hk150/ntm50/6s 5000mah alternative will probably continue as the starting/first board standard.. the hk150 nt...
by beto_pty
Dec 13 2014 3:17pm
Forum: Stand-up E-scooters and E-skateboards
Topic: New scooter build PATY-neta
Replies: 15
Views: 4724

New scooter build PATY-neta

Currently have 5 boards (4 are eboards) that i love.. the longboard, the learner, the stealthy, the push slayer and the beast.. they are all special and fit their design to the T. So I try to get the wifey to ride one of them just so we can go out together.. she (logically and wisely) refuses over a...
by beto_pty
Dec 12 2014 5:02pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Simple Charging Port (Plug n Play)
Replies: 17
Views: 1390

Re: Simple Charging Port (Plug n Play)

Hi I think the charger weighs around 80 grams.... :shock: should not be able to notice that...
the cherge plug idea is also great... im actually going to trying one at some point... just lazy to salder all those cables LOL
by beto_pty
Dec 12 2014 4:43pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Simple Charging Port (Plug n Play)
Replies: 17
Views: 1390

Re: Simple Charging Port (Plug n Play)

poor mans 6s bms...
allows you tu charge/balance using a single plug...

http://endless-sphere.com/forums/viewto ... 35&t=61171
by beto_pty
Dec 12 2014 2:47pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Looking at various longboards. Help?
Replies: 11
Views: 1173

Re: Looking at various longboards. Help?

yeah I guess we are all biased cause our boards suit us perfectly...
Our boards are built to order... our order.. also we are tinkerers and Diyers..
maybe the boosted, yunec or marbel websites and forums would be more of a purchase minded crowd...

or you could be awesome and make your dreamboard :D
by beto_pty
Dec 11 2014 9:15pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Looking at various longboards. Help?
Replies: 11
Views: 1173

Re: Looking at various longboards. Help?

Ditto on fixing your own stuff....