Search found 160 matches

by nowind
Feb 25 2016 1:33am
Forum: Stand-up E-scooters and E-skateboards
Topic: 3d-print e-mountainboard motor issues
Replies: 10
Views: 1766

Re: 3d-print e-mountainboard motor issues

Hard to tell, there will be some stress of course.
Just try it (-;
by nowind
Feb 21 2016 10:04am
Forum: Stand-up E-scooters and E-skateboards
Topic: Project Paragon | Trampa E-MTB | Custom Enclosure
Replies: 4
Views: 793

Re: Project Paragon | Trampa E-MTB | Custom Enclosure

Hey. The idea to complete mount all needet eletronics on the Motorside is for sure a compact possibility. But i cant imagine that the place is enough for a Dual Motor configuration, but maybe i´m wrong (-; I got one question. If i look at the mount i dont know how you will tension the chain/belt ? G...
by nowind
Feb 21 2016 8:12am
Forum: Stand-up E-scooters and E-skateboards
Topic: 3d-print e-mountainboard motor issues
Replies: 10
Views: 1766

Re: 3d-print e-mountainboard motor issues

Hey.

Yes its a problem if to less teeth in mesh.

I´m using a roller to use this problem.

My reduction from 12:72 is without the roller not workable.
K800_P1000174.JPG
K800_P1000174.JPG (93.01 KiB) Viewed 1616 times
Greetz
Jenso
by nowind
Feb 19 2016 11:29am
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa E-MTB with Skatetrucks -Ultralight Build
Replies: 22
Views: 4076

Re: Trampa E-MTB with Skatetrucks -Ultralight Build

The Mounts are on the thickest point 16mm and on the thinnest 6mm. Not absolutely sure about the motors, depends on how stable the Skatetruck is. But it will not be an Highspeed EMTB, i need more torque. I start testing with 2 APS 6374 130KV 3200W. http://alienpowersystem.com/shop/brushless-motors/a...
by nowind
Feb 18 2016 11:49pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa E-MTB with Skatetrucks -Ultralight Build
Replies: 22
Views: 4076

Re: Trampa E-MTB with Skatetrucks -Ultralight Build

Yeah (-;

Have to work on the Lipo and VESC Enclosure, cant use the UK Boxes again (-; You know it have to be lighter :mrgreen:
by nowind
Feb 16 2016 3:47pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa E-MTB with Skatetrucks -Ultralight Build
Replies: 22
Views: 4076

Trampa E-MTB with Skatetrucks -Ultralight Build

After three Trampas with Channeltrucks i want to build one with the Skatetrucks. My aim is to get as light as possible, i would like to use this Board in skateparks and for jumping. This is the Board: Trampa Holypro 15degree in 11Ply with Ultimate Trucks and Superstar Hubs. http://www.trampaboards.c...
by nowind
Feb 16 2016 2:42pm
Forum: Stand-up E-scooters and E-skateboards
Topic: 3d-print e-mountainboard motor issues
Replies: 10
Views: 1766

Re: 3d-print e-mountainboard motor issues

Hey. I dont know the ESC but i can point out something else. Your Gearratio is really bad. 3.65:1 is far away from good for an EMTB. You geared your board with the 12S Lipo for 43mph or 69kmh :shock: I use the same Motor with a 6:1 Gearing and it pulls like hell. Go at least down to a 12tooth pulley...
by nowind
Feb 14 2016 9:57am
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Chaindrive V2
Replies: 26
Views: 3294

Re: Trampa EMTB Chaindrive V2

Hey

I have linked the STL here in this Thread:

https://endless-sphere.com/forums/viewt ... 35&t=76102

Greetz
Jenso
by nowind
Feb 14 2016 9:54am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-MTB - Series Harness, Loop Key, VESC Enclosure
Replies: 4
Views: 1141

Re: E-MTB - Series Harness, Loop Key, VESC Enclosure

Hey.

I would like to share the STL of the VESC enclosure for not commercial usage.
vesc_case.zip
(573.26 KiB) Downloaded 48 times
Its an open source ESC :wink:

It would be nice if you work on and improove something that you share it again.

Greetz
Jenso
by nowind
Feb 07 2016 3:04am
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Chaindrive V2
Replies: 26
Views: 3294

Re: Trampa EMTB Chaindrive V2

Hey. Thx Okp. I wantet some color this time. I think the red match good with dte trucks and springs. I´m wondering your girlfriend dont like gold (-; normally girls love it. blingbling Its not that much lighter (-; In percent its around 15% lighter. In absolut its 50gramms for both Mountingplates. T...
by nowind
Feb 06 2016 12:27pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Chaindrive V2
Replies: 26
Views: 3294

Trampa EMTB Chaindrive V2

Would like to show you my latest Setup. After building the last Board with the Beltdrive i startet to retrofit the Chaindrive Board. The Board is a Trampa Shortdeck in 14PLY, handshaped, with a 13PLY Flexbridge. Without the Flexbridge it was to flexy for me, shaped to much :roll: Topview.JPG The Tra...
by nowind
Feb 06 2016 11:37am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-MTB - Series Harness, Loop Key, VESC Enclosure
Replies: 4
Views: 1141

Re: E-MTB - Series Harness, Loop Key, VESC Enclosure

Thx okp !

I thought not everyone knows, maybe it helps somebody out.
by nowind
Feb 06 2016 7:13am
Forum: Stand-up E-scooters and E-skateboards
Topic: AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VESC
Replies: 86
Views: 15026

Re: AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VES

Nice work my friend. Your carbon skillz are pretty well! You going straight forward to make the board more lightweight. Can you confirm that your Multistar Lipos have around 640gramm per 6S-5200mAh Pack as Hobbyking listed? I´m really trying to lower my boardweight too, build up a new Chaindriven on...
by nowind
Feb 06 2016 1:02am
Forum: Stand-up E-scooters and E-skateboards
Topic: E-MTB - Series Harness, Loop Key, VESC Enclosure
Replies: 4
Views: 1141

E-MTB - Series Harness, Loop Key, VESC Enclosure

Hey. Just wanna show some basic stuff for wiring up a E-MTB with a Series Harness and Loop Key. Using XT90 and one XT90-AntiSpark Connector. For the Harness i´m using 10AWG Silicon Wire, in this case from turnigy. Kabel-Komplett.JPG I´m using UK Ultra Box 308 for the batteryhousing, its good for max...
by nowind
Dec 06 2015 4:02pm
Forum: Stand-up E-scooters and E-skateboards
Topic: AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VESC
Replies: 86
Views: 15026

Re: AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VES

Hey!

Just for correct Information:

On OKP´s Trampa the reduction is 10/60 (-;

The 13/60 is from 6S Setup.

Nice Build OKP !

Jenso
by nowind
Dec 06 2015 10:47am
Forum: Stand-up E-scooters and E-skateboards
Topic: DIY Boosted inspired electric longboard
Replies: 136
Views: 28706

Re: DIY Electro-Trampa and boosted inspired electric longboa

Nice Cedric.
Happy to see you driving ... wheeling (-;
by nowind
Dec 02 2015 1:37pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Project E-Mountain Board
Replies: 16
Views: 1604

Re: Project E-Mountain Board

Hey. I doubt that you find something cheaper or similar cheap as HK. You are in the Uk? Normally i get all my Emtb parts from UK or EU Warehouse. Really rare that i need something from the international. What for parts you need from International? If weight is not an issue.. I'd go with dual 6374 19...
by nowind
Nov 30 2015 4:59pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Dual Motor "No-Wind"
Replies: 73
Views: 13259

Re: Trampa EMTB Dual Motor "No-Wind"

Oooh, very nice! Bling bling 8) Thanks. Yes Bling bling. Till the mud covers all this shiny Stuff ! Great looking parts! BTW. what mill are You using to machine parts (just curious :wink: ) I'm gonna start my electric trampa 35 long build soon (mountainboard should arrive this week), but I'll manua...
by nowind
Nov 29 2015 4:38pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Dual Motor "No-Wind"
Replies: 73
Views: 13259

Re: Trampa EMTB Dual Motor "No-Wind"

Hey!

Bad Weather this weekend, time to machine some partz....
K800_20151129_175143.JPG
K800_20151129_175143.JPG (74.89 KiB) Viewed 3259 times
K800_20151129_175154.JPG
K800_20151129_175154.JPG (78.17 KiB) Viewed 3259 times
Jenso
by nowind
Nov 27 2015 12:42am
Forum: Stand-up E-scooters and E-skateboards
Topic: need advice for electric mountain build please
Replies: 5
Views: 779

Re: need advice for electric mountain build please

Hey. On a MTB i would only go with Dual Motors. You talk about drifting? Go with a Dual Rear Setup. Perfect for drifting (-; 10-12S is the better way to go for a 30mph setup, btw its really fast, i would think about the gear ratio and go better with a 1:6 Reduction. I use the SK3 168kv with 12S and ...
by nowind
Nov 26 2015 1:01pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Project E-Mountain Board
Replies: 16
Views: 1604

Re: Project E-Mountain Board

Hey.

Its the right way to build from ground up by yourself.

Just thought about the cheap board, because its alot of work and if you use a poor quality board you have to do the job twice.

Jenso
by nowind
Nov 25 2015 3:00pm
Forum: Stand-up E-scooters and E-skateboards
Topic: Trampa EMTB Dual Motor "No-Wind"
Replies: 73
Views: 13259

Re: Trampa EMTB Dual Motor "No-Wind"

Hey.

Thx. No its not that Problem with the bearings. Maybe use some WD40 from time to time.

Jenso