Endless Sphere

twiersum wrote: ↑

Jul 16 2019 4:02pm

PhotoPictureResizer_190716_184252676_crop_2132x2192-852x876.jpg

I Lost 8oz on my main drive gear....next I'm going for 4 more oz with a smaller needle clutch bearing.
This thing is built like a tank with a Prius motor!

Very cool.

How feasible would it be to run this motor without an LCD? Could be useful for troubleshooting, or just a minimalist setup. Not sure if it could start without a power button. Many batteries have on off switches on them.

TSDZ2 can sustain about 500W continuous if you ise a 52V battery. This means it can sustain 9.5-10A continuous, I'm guessing. With 48V nominal that would be 450-480W. I've got 48V 750W from PSWpower, and it states in the description that it is 15A motor. Is there a difference between this one and t...

TSDZ2 can sustain about 500W continuous if you ise a 52V battery. This means it can sustain 9.5-10A continuous, I'm guessing. With 48V nominal that would be 450-480W. I've got 48V 750W from PSWpower, and it states in the description that it is 15A motor. Is there a difference between this one and t...

Did you install a temperature sensor(possibly incorrectly?). Someone else had the wrong wiring for the temp sensor and their display looked like that. Try reconnecting main cable connection to LCD, might be bad connection on data wire. Check for damage to the main cable wire. Others have had succes...

I have just tried the newest version 19a/036, and it worked great for a few km's. But after stopping at a store, I turned off the battery when I went in, and when I came out, nothing works. The display (vlcd5) almost seems frozen, no buttons are working, not info, not +- assistance level.. speedome...

Does anyone know how to change the max voltage on the 850c version of the TSDZ2. If I try to change these values, is it likely I'll possibly brick my controller? data.png data.txt program.txt Why don't you install our OpenSource firmware on your TSDZ2 and 850C display? I would prefer open source so...

Does anyone know how to change the max voltage on the 850c version of the TSDZ2. If I try to change these values, is it likely I'll possibly brick my controller?

Sorry for another newbie question guys, but in the section Battery is the value 625, are those the WH of my battery? batterie.PNG and where i have to place the engine power for my 350W motor? The only section where the motor power is named is the Street Mode street_mode.PNG 625watts is how much pow...

Hi Marcoq, why should it not work? I believe that the SW of the TSDZ2 is the same I think they have only adapted the connections ... of course the keys to configure the options may not match, Wpenner since you have the opportunity to test why you do not install it and so we check how it was done fo...

You only need 3 wires from the USB programmer. Just pull the metal connectors out of the plastic housing on the programmer and put some shrink tube around them. Then you will be able to fit the three wires into the correct pins on the speed sensor connector. If you use 4 wires as some diagrams show...

I'm about to order a kit from PSWPower with the VLCD5 display but the more I read the more confused I get. If I use the VLCD5 can I still flash the firmware? Would I be missing anything important that only using the KT-LCD3 can do, or can I still change any inaccessible settings by reflashing the c...

Hi Marcoq, why should it not work? I believe that the SW of the TSDZ2 is the same I think they have only adapted the connections ... of course the keys to configure the options may not match, Wpenner since you have the opportunity to test why you do not install it and so we check how it was done fo...

Translated by Google Translator: Hi guys. With this publication I officially released version 3.6 of the Java configurator and version M0.19.A for the controller board firmware. What has been done: - In the last release released, the eMTB mode started from TOUR assistance (up to TURBO), now with th...

Hi guys, sorry for the noob question... Just received tsdz2 with vlcd5 ( 6pin ) from pswpower. Do i need to upload any new firmware to the VLCD ( as for KT-LCD3 )? Or it should be stock and my work is just to upload Marcoq's firmware to the motor? I also noticed that there are 3 strange inputs on t...

My friends TSDZ2 appears to have a female connector coming from the motor and a color 850c display. Has anyone else seen this configuration? It is the same type of connector as on my TSDZ2. I'd like to flash it with custom firmware, but i don't want it to end up inoperable. I don't even know if the...

Translated by Google Translator: Hi guys. With this publication I officially released version 3.6 of the Java configurator and version M0.19.A for the controller board firmware. What has been done: - In the last release released, the eMTB mode started from TOUR assistance (up to TURBO), now with th...

My friends TSDZ2 appears to have a female connector coming from the motor and a color 850c display. Has anyone else seen this configuration? It is the same type of connector as on my TSDZ2. I'd like to flash it with custom firmware, but i don't want it to end up inoperable. I don't even know if the...

My friends TSDZ2 appears to have a female connector coming from the motor and a color 850c display. Has anyone else seen this configuration? It is the same type of connector as on my TSDZ2. I'd like to flash it with custom firmware, but i don't want it to end up inoperable. I don't even know if the ...

My friend decided to engaging the motor with throttle while the bikes was stalled. Heard a loud pop sound. I assumed it was the blue gear, but the gear looks OK. The spindle appears to be spinning in the middle of the blue gear. Can i simply replace the blue gear? Does it have the clutch built into...

My friend decided to engaging the motor with throttle while the bike was stalled. Heard a loud pop sound. I assumed it was the blue gear, but the gear looks OK. The spindle appears to be spinning in the middle of the blue gear. Can i simply replace the blue gear? Does it have the clutch built into i...

I'm having trouble figuring this firmware thing. Can I flash firmware if I have the VLCD6 display? Yes there is a version I use with lcd5 that also works with lcd6. Works way better than original firmware. https://endless-sphere.com/forums/viewtopic.php?f=30&t=98281&start=200 All you need i...

Now set to battery 18amps and 750Watts. It has much more power now. I still can't figure out how to turn off the 28km/h speed limit though. Speed on LCD5 in secret menu just says "---" now. I even unchecked the street mode check box. Tried setting to MPH in LCD5 also did not help. Next i ...

Now set to battery 18amps and 750Watts. It has much more power now. I still can't figure out how to turn off the 28km/h speed limit though. Speed on LCD5 in secret menu just says "---" now. I even unchecked the street mode check box. Tried setting to MPH in LCD5 also did not help. Next i w...

Finally got my programmer and loaded up the firmware. Was easy to just use the shrink wrap on the programming leads and not having to buy speedo extension cable. Took a while to get the pinout scouring the forum though. What is the max Watts for the controller I can set? It has less power than the o...