Endless Sphere

Hmm... I thought that the motor size or the power rating is irrelevant since the power output is dependent from the max current of the controller times the battery voltage... I have read somewhere that people are driving their "250W" motors up to 1kW and above with no problems at all. So ...

So, do you think my assumptions are right? Do you think with this system, I could increase my top speed? Right now it is topping at around 40km/h. But at this point I am only using 400w or so. If at this point I press a switch to connect another battery module to increase the voltage to 72V for ins...

Just a quick question which might have been answered before but I don't have the time to go through this huge thread at this moment. I'm planning to buy this s012s https://bmsbattery.com/ebike-kit/721-s12sn-1000w-40a-torque-simulation-sine-wave-controller-ebike-kit.html , program it for my liking bu...

Ok. So, when the blue wire and the red wire are connected, shouldn't there be a +5V reading from some of those display wires? I'm starting to think my controller is not working properly... ??? You wrote that you have a Bafang Controller?! I don't know, if this is switched on in the same way as the ...

Is it possible to turn on the S06S(or other KT/BMSBattery controllers) without the ON -button of LCD or LED? You just have to short the blue wire of the Display connector to the red wire to switch on the system. regards stancecoke Ok. So, when the blue wire and the red wire are connected, shouldn't...

Is it possible to turn on the S06S(or other KT/BMSBattery controllers) without the ON -button of LCD or LED? So the real question is, can I for example input a mimicing signal to the wire that goes to pcb's RX terminal(the wire is yellow colored at my main cable harness)? Is it that simple to awake ...

Thank you. This might be a bit weird question, but is it common that the pcb looks the same as for example S06S, dimensions of the board are the same, but the internals are totally different? I mean, it seems that I'm on the verge of finding what these clues on the pcb could mean; XT-SIN6SJ10 = XT -...

Hello. I received a badly beaten e bike to move the parts to my mtb. This was PAS only when sold. Does anyone have a clue what manufacturer is this controller from? The text on the case cover is mostly chinese but some numbers tell that this is 36V(operating voltage?) and a lower value 29V(cutoff?)....

casainho wrote: ↑

Jun 05 2018 6:27am

Valopallo wrote: ↑

Jun 05 2018 6:04am

Hello.

This thread is for KT/BMSBattery motor controllers only.

Ok. So the controller that I have is not KT nor BMSBattery even though it's very similar looking?
How do I know can this one be programmed?


For the other assembly questions I will start my own thread.

Hello. This is my first post here, so I'm going to explain my first electric bike project with some detailed info. I received this badly beaten bike without the original LCD(Bafang C965 -clone, 800U) and e-brakes. Apparently those were stolen from the previous owner. All that was left for me to begi...

... also, If you haven't checked already, make sure that the white wire is actually used by your system by checking if the white wire is soldered to the controller pcb. I have a controller-motor cable with the white wire connected only to the motor, but cut at the controllers end.