Endless Sphere

Proposal for validating measured human power As others did mention before, I wish we could validate our current measurement of human power as it seems an high value. Human power is pedal cadence * force applied on the pedals. For pedal cadence, I think we can trust very well on our current measurem...

The last thing I would like to know is if the throttle function operates as intended. Supposedly it did not work in a previous beta(?). Am not sure but there is an old issue posted on GitHub. Can someone confirm it does work? If it does, I see no reason to not release the official 0.19.0 for all us...

I took ride with v0.19.0-beta8 and it worked fine.
Tested walk assist, cruise and boost.

Big thanks once again for developers

After several commuting 24km roundtrips, I'm surprised how easy is to overheat this thing. Today on 12km trip, where 30% of it was in speed or turbo mode because of the inclines, whole motor case was pretty warm to the touch. I didn't push it too much, just tried to maintain speed over 15km/h on in...

A new beta soon to be released! I had some time today to make the last changes and have already submitted the Pull Request. As usual, Casainho will review the changes and then release the beta for the community. Changes: * Have rewritten the button code for the entire system. No more bugs. If there...

After several commuting 24km roundtrips, I'm surprised how easy is to overheat this thing. Today on 12km trip, where 30% of it was in speed or turbo mode because of the inclines, whole motor case was pretty warm to the touch. I didn't push it too much, just tried to maintain speed over 15km/h on in...

I have 36V and 250W motor. Menu 9:2 standstill and pedals horizontal 40 Driving without assist and light power 55- 57 at start 67 Interesting, compared to mine the absolute values are different but the delta is similar (17 in your case Vs 20 for light pedaling and 27 Vs 30 for higher torque). I'm c...

I have 36V and 250W motor. Menu 9:2 standstill and pedals horizontal 40 Driving without assist and light power 55- 57 at start 67 Interesting, compared to mine the absolute values are different but the delta is similar (17 in your case Vs 20 for light pedaling and 27 Vs 30 for higher torque). I'm c...

I have 36V and 250W motor.

Menu 9:2 standstill and pedals horizontal 40
Driving without assist and light power 55- 57 at start 67

May I ask if a couple of users can take a look at the Advanced Technical Data under sub menu 2, ADC Pedal Torque Sensor, and report what the resting value is. I am curious of the values from the torque sensor in different systems. This might be used later in the development to make the system more ...

I tried v0.19.0-beta 7. I drove to shop about 7 kms. There was quite poor assist alltough my levels and factors was exact same as previous version. Also other configurations are same as before. After shopping I went back to home and assist came back as good as before. Maby power off helped when I w...

It was a very fun ride with tszd2 motor once again. The v0.19.0-beta7 version worked very well. I tried walk assist and Cruise and both worked. I did’t tried the startup boost feature.

Big thanks to the developers.

I tried v0.19.0-beta 7. I drove to shop about 7 kms. There was quite poor assist alltough my levels and factors was exact same as previous version. Also other configurations are same as before. After shopping I went back to home and assist came back as good as before. Maby power off helped when I wa...

Hi, i haven't erased but before i had stock firmware. This is my first installation of open firmware. Do you think that i should erase all and then reflash? I was thinking to downgrade to 18.2 i have seen that there are a lot of users that are experiencing problems with 0.19.6 version. Someone sugg...

Buba, thank you for the great job.

What is FW?

Have you erased first previous version? If not, there is too many menus.

Brilliant buba. I hope blinking 1 problem is corrected.

I don’t have boost enabled and don’t have brake sensors. When blinking 1 comes it only disappear when I reboot display.

I’m waiting solution for blinking 1. It stops all assist. And it can appear suddenly when you start pedalling. Sometimes have to reboot display several times before blinking 1 disappear and motor is working again.

I don’t have any spesifc situations when it comes but it’s very annoying.

e3s wrote: ↑

May 14 2019 12:05pm

I removed the motherboard of the controller without damaging it because I want to mod it replacing some cables. If someone is interested I'll post some pictures.

Please do that.

I’m wondering ”blinking 1” problem. I used to drive before beta4 and the problem came up often. It is annoying when stopping traffic lights and ”blinking 1” comes on the screen and after that there is no assist at all. This happened quite often and sometimes helped when the display was restarted. L...

I’m wondering ”blinking 1” problem. I used to drive before beta4 and the problem came up often. It is annoying when stopping traffic lights and ”blinking 1” comes on the screen and after that there is no assist at all. This happened quite often and sometimes helped when the display was restarted. L...

I’m wondering ”blinking 1” problem. I used to drive before beta4 and the problem came up often. It is annoying when stopping traffic lights and ”blinking 1” comes on the screen and after that there is no assist at all. This happened quite often and sometimes helped when the display was restarted. La...

I installed beta 5 to motor and beta 6 to display . I couldn’t move on display menu at all. When I installed beta5 to display, it start working again.

I tried a v0.19.0-beta3 version today. I drove just a short distance because it was very cold and started to rain. Walking assistant worked well and cruise too. Boost function I didn't try. Suddenly the assist ended, I tried to increase the level of assistance, did not help. I booted KTLCD3 and the ...