Endless Sphere

ahh I see not very different except the amount of connections. What is your max draw. It seems like you maybe at a higher Amperage than I am so Im not seeing the sag as much.

I really wish you could do 2P of the 16AH multistars. They would have yielded better performance. Ive been running 1P and seeing the performance you are seeing but 2P was very stiff to me.

The MultiStars charged without event. This charge at 12 amps rate. I agree Christofer. The range is good. That's why we're onboard with this. Alternate Wiring Harness Design I'm documenting a possible alternate wiring harness here, I have not decided to make it at this point. I was thinking about a...

Voltage is a little spongy. Id take the range over voltage any day.

It maybe warm but the jacket wont fail. PVC wire will turn in to twizzlers pull and peel. They melt together possibly causing a dangerous short. I love soldering connectors with my butane torch and the jacket just ashes over when the flame hits it. .. rub it off keep moving. No melting or none of th...

12g silicon wire can take 90A Continuous... http://www.buddyrc.com/black-12awg-silicone-wire.html

1 8G to (4) 12G should have been doable and sufficient for the current you will draw. 12G can do 90A continuous

Im a big guy I like big wheels. Even though im a big guy I like to pedal.. small wheels dont allow me to keep my preferred cadence unless i go to a large chain ring which dont fit so well on small wheel bikes or having a jacked up chainline. so im in a conundrum. Its either I have a bike built for f...

Sometimes programming doesnt match up with the real word results. Meaning its not perfectly 1:1. Come to think of it I was seeing 80A out the box before any changes So yeah mine is slightly overclocked but Lyen also beefed up the traces on my controller so Im not worried about it to much. The CA rea...

Its good to know this information. I was thinking about maxing out my setup at 18s and I can still get 40mph. Thats good enough to do what I want. Thanks for this info. Im running 65A battery which turns out to be 80A and 170A on the phase.

The ones i suggested should be able to handle much more that what you put in there.

Only took like 30 minutes but I got the rear brake dial in to where I got full grab yet I can still enable regen. Awesome feelings. I also got the Nord Lock washers installed today. Im going to ride to the LBS here in a bit to get the ole leg muscles going again and so they can get a taste of what t...

I wanna leave this here for people that had or are having troubling getting the temp sensor KTY83/110 PTC set up on the MXUS 3000 motor. http://www.endless-sphere.com/forums/viewtopic.php?f=6&t=66305&start=50#p1013306 This is a polar/diode type device meaning it can only be wired one way or ...

Fixed the surging issue I'm seeing a lot of sag today. Left the bike and batteries in the garage so I'm seeing like 10v sag and slow voltage recovery.

I was riding unrestricted but i was sandbagging. The bike can get away from you real quick and taking corners on crappy roads keeps me off the throttle. I have yet to do any real range results but if i carry my full pack Im expecting 50 miles at top speed and 250 miles at 20mph.

Now that I have my presets set I have to now address the gain to reduce the surging.

Issue resolved. I had to play around with the voltages for the min and max to get it in the specific range to enable the 3rd preset.

I have a CA v3 of course. I bought a 3 speed switch from Grin. I have it setup for 3 presets but im unable to see or activate the 3rd preset. The other two are set and are changing. when I look at the live data I can see the voltage change for all 3 settings. I can see the screen prompt for preset 1...