Search found 159 matches

by obcd
Mar 21 2020 9:43am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

That pomp design is based upon a rubber tube that is pushed flat at 2 positions that move with the rotating motor. The product that will be pumped is desinfection hand gel, so it's not as liquid as water. Basically, the motor pushes the gel trough the tube. The motor has a gear box that reduces the ...
by obcd
Mar 21 2020 8:27am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Doesn't sensorless need minimal rotation at startup to figure out the rotor position?
Can it start running from a standstill without issues?
by obcd
Mar 21 2020 7:27am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Again, thanks for the answers. There is already a connector for the hall sensors as well. The small pcb connects to some io lines on the main microcontroller that are not connected according to the S06S schematics, PD2 PD3 and PD4. The controller indeed can work on brushless motors as well. As I wan...
by obcd
Mar 20 2020 7:35pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

As I needed a controller in a hurry, I bought the KT36ZWSRMT-XW01DL 36V 11A one. As expected from the serial number, the phase current measuring chip is not present on the board. On the S06S, that chip is marked as ACS711. There are 3 different types of that chip for different currents. As the outpu...
by obcd
Mar 20 2020 4:37am
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

How would you connect the programmer if you are making changes to the firmware? There are 2 things unclear. 1. The usb programming stick 5V is connected to the controller 5V. I assume this powers the microcontroller with the pc usb 5V so that the controller can be programmed without the need to powe...
by obcd
Mar 19 2020 5:53pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

Just look for the datasheet of the microcontroller. It should give you a clue which pins are port C. Next, look in the code what GPIO_PIN_4 is defined as. It gives you a clue which bit of port C is used for the lights. On some schematics I found PC4 and PC7 go directly to a header. Those 2 are good ...
by obcd
Mar 18 2020 4:38pm
Forum: Items Wanted
Topic: Looking for Kuteng KT36 controller
Replies: 0
Views: 926

Looking for Kuteng KT36 controller

I am located in Belgium and are searching for a Kuteng KT36 (SVP?) or equivalent. It's not for a bike but for a 36V 3 phase brushless pump motor that will be used to fill bottles with desinfection hand gel. The pump controller is defective, and the Kuteng with osf seems like a perfect way to get the...
by obcd
Mar 08 2020 8:47am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

If I remember reading correctly, the overrun fix is only in the motor.c file.

Would it be possible to post that one for those unpatient (like me)

I understand it needs some testing before it can go mainstream. Just (very) curious what has changed.
by obcd
Mar 08 2020 5:30am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Is this code already having the latest overrun fixes described on the jobike.it forum or do we have to wait a little longer for that?
by obcd
Mar 06 2020 7:48am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

You should be able to measure a voltage on the brake input when the brake isn't engaged. It can be either close to 5V or close to 3V3. It becomes zero if the input is connected to gnd. (Obviously you can't use it to power your gear switch sensor) So you basically only have the 5V supply voltage miss...
by obcd
Mar 05 2020 6:25pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

The temperature sensor and the throttle both use the same analog input on the microcontroller. So you either has firmware with throttle enabled that measures the voltage on that input and gives motor assistance relative to that voltage, or you have firmware that measures the voltage on that input an...
by obcd
Mar 04 2020 5:58pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

The brake input is designed for that purpose. The fact it works on the speed sensor input is nice but likely not something programmers will test every time they bring out a new version. The time the motor interrupts it's assistance is likely the time needed for one wheel rotation. Upon the the next ...
by obcd
Mar 04 2020 8:05am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Assume the speed signal is a voltage that is pulled to gnd every time the magnet passes the sensor. The fastest way to measure speed would be to measure the time between 2 of those pulses. If there is no filtering and you inject an extra pulse with the gear sensor, it will increase the speed readout...
by obcd
Feb 28 2020 8:08am
Forum: Battery Technology
Topic: What do think of this BMS?
Replies: 10
Views: 729

Re: What do think of this BMS?

Looks good except that the price you initially see is for the lcd display only.
by obcd
Feb 26 2020 5:06am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6506
Views: 481858

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

The motor is not exactly very well thermally connected to the housing. So saying it doesn't warm due to the fact it doesn't feel warm seems a bit short trough the corner. Next there is the environmental temperature. The motor might overheat faster in summer when it's 30 deg C compared to 6 deg C in ...
by obcd
Feb 24 2020 10:24am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

To get power from the motor, you need to feed it current. The osf firmware might be driving the motor a bit more efficient due to it using simplified foc, but the biggest boost likely comes from the fact that the motor current is less restricted and the software allows the motor to produce peaks of ...
by obcd
Feb 19 2020 4:20am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Isn't that what ebrakes are for? The brake lever closes a contact that turns off the motor.
by obcd
Feb 19 2020 4:16am
Forum: Motor Technology
Topic: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app
Replies: 433
Views: 64926

Re: Bafang SW102 Bluetooth LCD - OpenSource firmware and mobile app

The open source firmware for SW102 is not compatible with the bafang motor. That motor display combination will only work with the original firmware. The open source firmware is for the tungsheng tsdz2 mid drive motor (also running on open source firmware) And, you need matching firmware versions or...
by obcd
Feb 19 2020 4:10am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6506
Views: 481858

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Maybe they saw the light and have implemented simplified foc in their firmware as well. With a bit of luck, they still use the same microcontroller. Or it could be that the old controller still works with the new motor. If it's mechanical more robust, that's a bonus. For the rest, we can only wait a...
by obcd
Feb 19 2020 3:59am
Forum: Battery Technology
Topic: Fast Charging - What is the secret?
Replies: 36
Views: 2548

Re: Fast Charging - What is the secret?

The "ostrichoo julius" seems to use super capacitors as battery. Besides the fact they can charge in 30 minutes, they also seem to be less sensitive to temperature fluctuations. They also lower the possibility to set your house on fire and can be recharged 2000+ times. Their disadvantages ...
by obcd
Feb 18 2020 5:34pm
Forum: Motor Technology
Topic: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)
Replies: 4391
Views: 429211

Re: KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW

http://www.mekacademy.com/ I am a bit confused here as the mounting of the planet wheels is rotating as well. If I remember well, in my front wheel geared hub motor, they are fixed to the axis and frame...? So, can't I just take the teeth ratio to figure out motor speed / wheel speed proportion? Sor...
by obcd
Feb 18 2020 5:20pm
Forum: Battery Technology
Topic: Fast Charging - What is the secret?
Replies: 36
Views: 2548

Re: Fast Charging - What is the secret?

2022 is still 2 years away.
The e-bikes with super capacitors instead of lithium batteries are already on the market.
And a John Deere to go to work is a bit expensive.
by obcd
Feb 18 2020 5:17pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6506
Views: 481858

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Doesn't the st-link boot as soon as it has gnd and 5V. (No idea, just thinking loud) Maybe someone can tell if you are suposed to measure a voltage on the swim line. If it should have some, you could measure it. If it's there it means the wires are making contact. Let's assume you have a motor that ...
by obcd
Feb 18 2020 5:03pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1554
Views: 174909

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

The tutorial describes both stock firmware reprogramming and osf firmware programming. It's still unclear what you did. The eeprom (electrical erasable memory) is a piece of memory used to store parameters that don't need to be changed frequently. Those parameters remain in the memory when the power...