Search found 149 matches

by mbrusa
Jun 04 2020 11:16am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Can Someone help me with a change of setting please. I am working with the new configurator I have changed a few settings but for some reason now when I start pedalling and when I stop pedalling my pedals seems to pull outwards like there is to much torque it is mostly recognisable in eco mode and ...
by mbrusa
Jun 04 2020 3:44am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

So changing the display to always-on kept the display always on. But if you turned off the power on the display it wouldn't turn back on unless you shut off the power at the battery and then turned it back on. Is this just my system and if so how do I fix it? or are others having the same problem, ...
by mbrusa
May 29 2020 2:31am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi Can someone help me with one setting on the new firmware please. I am having great results with the motor and have it to a place were I am happy with. But I have noticed on my display when I first switch it use to give me the percentage of battery life but now it always gives me a reading of 99....
by mbrusa
May 29 2020 2:21am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I installed the OSF on my FS bike yesterday, and found after trying to calibrate the torque sensor that right and left pedal is really different. When calibrating with the right pedal I got 80 range and 87 step, and the left one I got 120 range and 56 step. Both of the methods resulted in waaaay to...
by mbrusa
May 26 2020 2:23am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Thank you mbrusa for quantifying the startup times of version B, 6 seconds, compared to version A, 5 seconds. It's a 20% increase, which might be ok if there are no other additional delay. And my additional question related to the need or not to not put your foot on the pedals when you turn on the ...
by mbrusa
May 25 2020 5:11am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... What I have learned is that I can't have a foot on any pedal when booting because of the pedal sensor (torque sensor) which is calibrating at each reboot. It is true with the original firmware and I think that it is still valid with the OSF. And this is the reason why a too long boot is not goo...
by mbrusa
May 24 2020 4:06am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi all, and thank you Mbrusa for opening the wiki. I tried to update the OS/X and Linux wiki page. I am supposing that on these Operatins systems, people know how to use the command line! Please have a look! And feel free to make remarks and improvements. Also, I tried to flash the latest version m...
by mbrusa
May 23 2020 3:31pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... When I touch the light button nothing happens, I think it should scroll through the three set 2, 4, 7 ? If I double touch the light button it shows Err 02 which should be the volts but shows Err02 and 0 alternatively as though you are wanting to change the parameters regardless of the assistanc...
by mbrusa
May 22 2020 2:28am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Thanks, I'll change that figure to 8 and work from there. Its odd though on the LCD3 version V20 Beta 1 there is almost zero hint of an over run. Another question. I fitted a 48 Volt motor I had laying about as a trial and went across to the experimental setting to see if I could get a better caden...
by mbrusa
May 21 2020 7:34am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Mbrusa, I've got both a LCD3 and the version here for the VLCD5 but I have to say that the engine over run is much worse on the latter software than the original V20 Beta 1 on the LCD3. Firstly how can I check I have the latest version of the software ? Waynemarlow, I don't have an LCD3 to do the c...
by mbrusa
May 21 2020 4:21am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Are there any fundamental differences between this and LCD3 firmware? I know this had a different feeling when marcoq was developing it despite being a "fork" of the casainho firmware (when it was still 0.19). But since now mbrusa ported it are they practically the same? The firmware is b...
by mbrusa
May 21 2020 3:40am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Yes, the default .ini will create a default config.h which can be dangerous to flash. Stancecoke made his wiki "open to everyone" on GitHub and that the reason why I already made the OS/X and Linux page. But when his wiki have been "ported" to mbrusa wiki, it has been deteriorat...
by mbrusa
May 18 2020 4:33am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi revher When it turns on the first time after flashing, the % battery is always set to 99.9, I had to put a default value on startup for a problem with VLCD6. The following times it is set to 99.9 only if the voltage of the individual cells is higher than the "Reset SOC percentage" value...
by mbrusa
May 17 2020 2:02pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi revher When the lights come on, there is an automatic display of the data in sequence. Read in the additional manual. 99.9 is the percentage of the battery, then the voltage is displayed. If you don't want to see this data with the lights on, disable "Auto display data with lights on". ...
by mbrusa
May 16 2020 3:58am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I would like to try this newer version with more advanced torque sensor related settings, as well as the torque sensor calibration which I have not done, but before I start can someone advise settings/parameters to pay particular attention to that would get me close to my desired goal? For example,...
by mbrusa
May 13 2020 10:51am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Try connecting ST-LINK Open ST Visual programmer Check Configure = ST-LINK, USB, SWIM, STM8S105x6 Select OPTION BYTE tab Program -> Current Tab If there are errors, you have installation or connection problems. If instead there are no errors Close ST Visual programmer Open Java Configurator Compile ...
by mbrusa
May 13 2020 4:07am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I updated the firmware. The management of the "Pedal torque adc range" and "Pedal torque adc offset adjusment" parameters has been improved. These two parameters are not present in the 20beta1 version of buba.  - "Pedal torque adc range", added parameter to compensate f...
by mbrusa
May 12 2020 4:41am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Ops...
By link of the wiki I meant this:
Link wiki.jpg
Link wiki.jpg (168.44 KiB) Viewed 854 times
Inside the documents are those of stancecoke.
I had only made one copy and paste
As soon as I have time I check and correct.
by mbrusa
May 10 2020 1:15pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

The settings are fine, the fact that the display lighting is activated and E02 is displayed means that the lighting command is ok.
Did the lights work before? Isn't it a cabling problem?
by mbrusa
May 10 2020 9:52am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

If you do not want to display the data when the lights are turned on, disable "Auto display data with lights on".
If you don't want to change the parameters, disable "Set parameters on startup".
However when the lights come on, E02 will always be displayed for 5 seconds.
by mbrusa
May 05 2020 2:12pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

With the first version released, walk assist was not working, then I had made updates.
Try this which is the latest version
TSDZ2-v0.20.1-update_fix_overrun-LCD3_version.zip
(45.59 KiB) Downloaded 95 times
.
by mbrusa
May 05 2020 6:49am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi Elinx This is the link to my new repository, fork of the casainho repository. https://github.com/emmebrusa/TSDZ2-Smart-EBike-1 The previous one will no longer be updated. I also added the link in signature. I read "the higher cadence option by field weakening", very interesting. I will ...
by mbrusa
May 03 2020 8:19am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Thanks stancecoke. How many things I have yet to learn ... I still ask you for advice, now I have two repositories "TSDZ2-Smart-EBike" and "TSDZ2-Smart-EBike-1". Can I delete "TSDZ2-Smart-EBike" and rename "TSDZ2-Smart-EBike-1" so that existing links still wor...
by mbrusa
May 02 2020 2:37pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163132

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Stancecoke there is news, I tried to click on "fork" in github.com, my account was opened and I found another "TSDZ2-Smart-EBike-1" repository, it is the one I had deleted "forked from stancecoke / TSDZ2- Smart-EBike ", is this what you meant? Now I have copied it local...