Search found 149 matches

by mbrusa
May 02 2020 10:11am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I posted the new version on GitHub Thank you! :thumb: Unfortunately, you did not use the github fork function, so the link to the original project of casainho was lost. Please, can you copy the wiki of my repo to yours, then I can delete my repo. regards stancecoke Hi stancecoke It's important? Can...
by mbrusa
May 02 2020 3:25am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi everyone I decided to release the new version, I would have liked to try it a little more, okay, from Monday I can do it. However, two months locked at home have served to fix many small details of the firmware (changelog.txt) and to complete the Java Parameter Configurator of Stancecoke that I t...
by mbrusa
Apr 26 2020 1:37am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

... I might consider trying "assist without pedal rotation" - however can this even be enabled without brake sensor installed? (yes also the rider needs to be very careful with this). Maybe if i tune it with a low value that it is still relatively safe. With the 20 beta 1, I have always u...
by mbrusa
Apr 23 2020 3:43am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

One question,pulling back on the cranks as the system boots up, when they release, does the bike not start alone without pedaling? No, the bike doesn't start on its own, it starts just the same as if I hadn't pulled back when we boot the system. The difference is once you start to move it's a lot s...
by mbrusa
Apr 23 2020 2:36am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Already in version 20 beta 1 for LCD3, buba had eliminated the boost function. It can be replaced with the "motor acceleration" parameter. Increase very carefully! Another possibility to have the push at the start is to enable "assist without pedal rotation". What version of firm...
by mbrusa
Apr 23 2020 2:11am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Welcome back famichiki

My first test was also similar to yours, based on ui16_cadence_sensor_ticks_counter_min.
It was pretty good but I couldn't get it to work in advanced mode.
So I preferred to create a separate code that works in parallel with the existing one.
by mbrusa
Apr 19 2020 10:22am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

One question,pulling back on the cranks as the system boots up, when they release, does the bike not start alone without pedaling?
by mbrusa
Apr 17 2020 3:14am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

I try to see if I can do anything.
Can you tell me the values of "Torque sensor ADC value" in LCD3 Advanced Technical Data.
Value by pulling back on the cranks as the system boots up.
Value without pulling back the cranks.
by mbrusa
Apr 16 2020 5:52am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

No, if there are heating problems, they remain!
They can be solved only by limiting the power or by installing the temperature sensor or with other cooling systems.
The question is whether he wants to have the current maximum power with less effort. Obviously the heating problems increase.
by mbrusa
Apr 16 2020 2:10am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Really "startup assist without pedal rotation" no longer works? Correct it doesn't work anymore. I fixed the "startup assist without pedal rotation" problem, it actually didn't work anymore. Sensitivity 20 is already very high, you probably don't use the whole range. Keep in min...
by mbrusa
Apr 16 2020 1:50am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

You cannot change the default assistance level at startup, It is in the display firmware and cannot be changed.
However, it is possible to change the intensity of assistance at all levels with POWER_ASSIST_LEVEL_X, (if you use power assist mode).
by mbrusa
Apr 14 2020 3:56am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I put my wanted settings in TDSZ2 Parameter Configurator and manual change settings in edit_advanced.bat. After that i save settings in edit_advanced.bat file compile and flash the firmware. When i want to change settings i put new settings in edit_advanced.bat file and compile. Now my old advanced...
by mbrusa
Apr 14 2020 3:41am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1525
Views: 163117

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Hi, sorry for my poor english. I downloaded the software via Java cofnfigulator from this link https://github.com/stancecoke/TSDZ2-Smart-EBike/find/master?q= I set my battery to 14s and minimum voltage 42v and set 48v for the engine. I changed nothing more. Unfortunately, I still have a problem wit...
by mbrusa
Apr 13 2020 9:20am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Really "startup assist without pedal rotation" no longer works? I didn't notice, now I check. For eMTB I have to understand better. Do you have a coaster brake motor? At power on, do you have to pull the pedals backwards? Sensitivity 20 is already very high, you probably don't use the whol...
by mbrusa
Apr 10 2020 11:43am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6444
Views: 471650

Re: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Thanks! I will look at your current code here and use your values. So the idea is to slow down the motor reaction when "cutting the power" (duty-cycle). Why not change instead the percentage of min cadence change, the amount of ui16_cadence_sensor_ticks_stop? On my code I am using the ui1...
by mbrusa
Apr 09 2020 2:17am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

... Keep me posted if you want to try something else. I will test it. Thanks I tried 48 volt high cadence mode and I really liked it from 70 RPM to 90 RPM it pulls a lot better. And I can pedal up to 110 RPM This is not a solution to the gearsensor problem but it can improve. If it gets worse or yo...
by mbrusa
Apr 08 2020 2:17pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6444
Views: 471650

Re: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Casainho there is a problem in version 0.8.0. by 0.7 the engine stop time has been shortened. it is too short for my bike frame. this causes the engine to stop constantly on bumps and unevenness. It will be a big problem in some frames with full suspension where crank retraction occurs while bendin...
by mbrusa
Apr 07 2020 1:40am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Thanks to you for the project that you have started and that you are carrying out with always interesting improvements. I am happy that motor overrun solution can be useful to everyone. I started to get interested in the firmware for fun, but then it became a challenge to myself. With TSDZ2 I keep b...
by mbrusa
Apr 05 2020 2:25pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

I didn't notice any difference in the start-up time after I shift still at 2 seconds or 2 revolution. I'm sorry I expected an improvement ... However, I continue to look for a solution. I think the perfect setup would be that when you shift the motor stops completely like it does and then within a ...
by mbrusa
Apr 04 2020 10:22pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

Mbrusa Do you have a link to the hex file for the motor based on your changes and Buba's V20, I'm just about to reprogram a unit and refit it to the bike Thanks The last hex file for the motor, version with LCD3 display, can be found on this page a few posts back. https://endless-sphere.com/forums/...
by mbrusa
Apr 04 2020 1:33pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

I have the gear sensor hooked up where the brake sensor goes and that's it no brake sensor is used. Yes, I will test a new firmware change even if it hasn't been tested by you. THANKS Okay let's do this test. I send you the hex file with a private message, then if it works I will released it on the...
by mbrusa
Apr 04 2020 12:51am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

I rode 25 miles today on my handcycle and I didn't notice any difference with the changes that you made. It all seem to be exactly as before. THANKS Positive is that it does not depend on "fix overrun". I think I understand where the problem is. The stop with the brake sensors is immediat...
by mbrusa
Mar 31 2020 10:48pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

jeff.page.rides wrote:
Mar 31 2020 5:58pm
Thanks, I'll give it a try on Friday. Do we need to just flash the TSDZ2 I hope or do we have to flash the LCD3 also?
Only the TSDZ2.
by mbrusa
Mar 31 2020 1:30pm
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

jeff.page.rides wrote:
Mar 31 2020 11:41am
I am using the LCD3 with version 20 beta 1 and the overrun fix installed a couple of weeks ago. Is this file the same or is it something you've changed for me to try?
Yes it is a new version to try.
by mbrusa
Mar 31 2020 7:33am
Forum: Motor Technology
Topic: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)
Replies: 173
Views: 20555

Re: TSDZ2 open source firmware only for KT-LCD3 (v0.19.0 / v.0.20.0beta1)

I installed my shift sensor on the brake sensor plug and wow does it shift great. The second I push my shift button the motor stops it shifts fast, smooth, and quiet. Now the problem is it powers off for about 2 seconds and about 2 revolutions at 75 RPM before the power comes back on, that's a long...