Search found 9568 matches

by 999zip999
May 19 2021 4:12pm
Forum: EBike General Discussion
Topic: SW900 display codes
Replies: 14
Views: 346

Re: SW900 display codes

It also runs at 36v or charge voltage of 41volt and reset and runs at 54v. But won't light up display at 72v at 81v. Thank you for the help as it runs at 48v and 36,v in the air. I contacted ebikeling and they asked me for the order number item number etc. I guess they will have to look up what they...
by 999zip999
May 19 2021 2:26pm
Forum: EBike General Discussion
Topic: SW900 display codes
Replies: 14
Views: 346

Re: SW900 display codes

Ok it spins at 48v ( just a pedago 48v 10ah 15amp battery at best ) So changed the settings to 72v and it won't light up ???
by 999zip999
May 18 2021 7:15pm
Forum: EBike General Discussion
Topic: SW900 display codes
Replies: 14
Views: 346

Re: SW900 display codes

Well hooked up to 48 volt I got to turn on and I was able to program it first 48 v and set everything up. I turn the throttle and nothing. So reprogram to 72v and lcd will not light up ? Two hours of cussing.
by 999zip999
May 18 2021 3:05pm
Forum: EBike General Discussion
Topic: SW900 display codes
Replies: 14
Views: 346

Re: SW900 display codes

Thank you I had that printed out for ez reading and know I see the supper small arrow between the up and down button. Now that it's in print I will try. Thank you
by 999zip999
May 17 2021 10:02pm
Forum: EBike General Discussion
Topic: SW900 display codes
Replies: 14
Views: 346

SW900 display codes

I got my ebikeling 3000 watt put together and noticed the display had a 48v sticker. So I hooked of a 48v battery at 54v and got a error 06 check everything and read 06 is battery over voltage and read under voltage ? So read the email. New message from: ebikeling Top Rated Seller(8,261Green Star) H...
by 999zip999
May 16 2021 1:04pm
Forum: EBike General Discussion
Topic: Disaster today, almost set two fires with BBSHD and 52v batteries
Replies: 62
Views: 1163

Re: Disaster today, almost set two fires with BBSHD and 52v batteries

A multimeter is your best friend you use it before you plug in anything in especially the battery. If that bent pin would have been shorted it would have been melted that's my assessment.
by 999zip999
May 15 2021 9:57pm
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

Mine are 24v HRP series. Yeah I probably don't have them adjusted not exactly to the same level. That makes sense thank you.
by 999zip999
May 14 2021 2:34pm
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

Fippy what my kingpan charger from Ping doesn't shut off ??? After full charge. I have three meanwells 24v set to 28v each for 84v and at end of charge the top and bottom meanwells green light turn off. I unplug everything and just plug in the 3 chargers again and all three green lights go back on ?...
by 999zip999
May 14 2021 10:42am
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

Meanwells work great but won't turn off till you unplug it.
by 999zip999
May 13 2021 10:25am
Forum: Items for Sale - Used
Topic: 72v 8ah 100a bms. I have 4 of these.
Replies: 11
Views: 808

Re: 72v 8ah 100a bms. I have 4 of these.

I made one of these batteries as 20s It runs great and keeps balance with no b.m.s and get 7.5 ah @ 40amp max. Charging at 12amps. Strong cells. Make sure the size of the battery fits your needs.
by 999zip999
May 13 2021 10:00am
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

Can't you buy a few more cells from battery hookup. Is that where you got these ? I find them to be nice reasonable people when I bought a box of 36 I asked for for more cells and they are able to put 40 cells together for me even though the boxers 36. 200amp cell. 16's is the way to go to make it e...
by 999zip999
May 12 2021 3:22pm
Forum: EBike General Discussion
Topic: YesComUsa - 36v 750w 24inch Ebike kit
Replies: 18
Views: 638

Re: YesComUsa - 36v 750w 24inch Ebike kit

That usually means you can run 48 or 52 volt but is not 100% guarantee.
Watch lvc and don't over discharge the battery !
by 999zip999
May 12 2021 3:19pm
Forum: EBike General Discussion
Topic: Help with choosing the right battery for powerful motor
Replies: 22
Views: 789

Re: Help with choosing the right battery for powerful motor

: Many many articles and threads on how to use and repurpose leaf modules.
by 999zip999
May 12 2021 3:17pm
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

Yes 16s is common and 15s is something you have do on your own. Why why 15s ?
by 999zip999
May 11 2021 3:20pm
Forum: Battery Technology
Topic: LiFePo4 15s Charger?
Replies: 33
Views: 801

Re: LiFePo4 15s Charger?

What lifepo4 cell ? No need to go above 52v or 3.5 v per cell. The cell and capacity or ah with determine at what amps you can charge this battery at. Along with the limitations of the BMS if you're running one.
by 999zip999
May 10 2021 5:14pm
Forum: EBike General Discussion
Topic: YesComUsa - 36v 750w 24inch Ebike kit
Replies: 18
Views: 638

Re: YesComUsa - 36v 750w 24inch Ebike kit

Most of those kids can run at 48 volts but your reader if it's a 3 light meter will be off as that meter is made for SLA usually. The best idea would be the open it up and see if you have 63 volt caps or higher and at that point are 88% guaranteed it will work. I heard or think the rule is they use ...
by 999zip999
May 10 2021 9:47am
Forum: EBike General Discussion
Topic: How does ANT BMS balance the battery pack and how long does it take?
Replies: 7
Views: 267

Re: How does ANT BMS balance the battery pack and how long does it take?

You need to balance the pack before you install the b m s. The BMS and its tiny balance circuit will help to keep a balance battery balance. Yes I would charge up to the low parallel group and don't over charge. Whatch for the cells don't get hot . sometimes a cell that is bad only take so much char...
by 999zip999
May 09 2021 9:49pm
Forum: EBike General Discussion
Topic: Help with choosing the right battery for powerful motor
Replies: 22
Views: 789

Re: Help with choosing the right battery for powerful motor

I would look into used leaf cells or other automotive grade cells that will fit.
by 999zip999
May 08 2021 12:56pm
Forum: EBike General Discussion
Topic: Help with choosing the right battery for powerful motor
Replies: 22
Views: 789

Re: Help with choosing the right battery for powerful motor

Give us all the dimensions of your battery box.
by 999zip999
May 07 2021 8:40am
Forum: Battery Technology
Topic: charges only 53.2 volts, it is meant to charge 54.4
Replies: 5
Views: 242

Re: charges only 53.2 volts, it is meant to charge 54.4

Find out the state of charge of the battery or what is the charge level in each cell ? Start at the negative end as cell one moving to the positive end record each voltage of each cell like this on a piece of paper. 1. 4.20v 2. 4.01v 3. 4.15v 13. Xxx Report back. Plus Check voltage of charger. Share...
by 999zip999
May 04 2021 2:01am
Forum: EBike General Discussion
Topic: Help with choosing the right battery for powerful motor
Replies: 22
Views: 789

Re: Help with choosing the right battery for powerful motor

A throttle ask 4 wattage voltage from the controller the controller demands it from the battery. That's iit The battery is very dumb that's why it needs a BMS a battery management system . A controller controls A throttle demands from the controller. Never mind a throttle will only tell sometime tom...
by 999zip999
May 02 2021 11:39pm
Forum: EBike General Discussion
Topic: Help with choosing the right battery for powerful motor
Replies: 22
Views: 789

Re: Help with choosing the right battery for powerful motor

The only thing that can melt your motor is the throttle or the controller. build the battery bigger and stronger and more powerful than you need and then you won't use it to its limits and it won't wear out prematurely. Remember your controllers are programmable and it's called the controller for th...
by 999zip999
Apr 29 2021 5:12pm
Forum: EBike General Discussion
Topic: Leaf / leafmotor / leafbike high efficiency 1500w motor
Replies: 2003
Views: 261283

Re: Leaf / leafmotor / leafbike high efficiency 1500w motor

I were on an edge 1500 watt 35 mm aluminum stator and run 80v @ 40 amps with fins no problem. Oh I also cut three holes in the side plate on each side to let the heat out. No worries I've other side plates from Milton motors if this doesn't work. I was trying to keep the weight down as a message 3,0...
by 999zip999
Apr 25 2021 5:49pm
Forum: EBike General Discussion
Topic: Adding electric assist to Babboe Curve cargo bike
Replies: 6
Views: 654

Re: Adding electric assist to Babboe Curve cargo bike

I don't see one of the basic mid drives working as I don't think there's any room for it. Well a 3000 watt mxus with 52 volts.
My dad used a belt also he was a Gemini we never knew which one you're going to get .