Yet more Server Upgrades! October 29th at 00:30 PDT

Talk about anything and everything here within reason.
Post Reply
mrvass   10 W

10 W
Posts: 88
Joined: Apr 21 2011 4:32pm
Location: Vancouver, BC
Contact:

Yet more Server Upgrades! October 29th at 00:30 PDT

Post by mrvass » Oct 26 2012 3:08am

The next set of upgrades will be pushed to the live server at 00:00 PDT on October 29th (Sunday at midnight PDT). Again, the board will be disabled for 2 hours at most at this time. This is the last update in the planned set of three, so expect a number of new features!
Last edited by mrvass on Oct 29 2012 3:40am, edited 2 times in total.
Reason: Server update complete!
2807 NC Hub on 700c wheel x 20A Infineon controller x 48V 8Ah LiMn Ezee on a basic Norco hybrid bike

User avatar
justin_le   10 MW

10 MW
Posts: 2233
Joined: May 28 2007 3:27am
Location: Vancouver
Contact:

Re: Yet more Server Upgrades! October 29th at 00:00 PDT

Post by justin_le » Oct 26 2012 5:53am

mrvass wrote:The next set of upgrades will be pushed to the live server at 00:00 PDT on October 29th (Sunday at midnight PDT). Again, the board will be disabled for 2 hours at most at this time. This is the last update in the planned set of three, so expect a number of new features!
And for those who missed it, the changes implemented in the recent shut down are explained here:
http://endless-sphere.com/forums/viewto ... =1#p655352
Previously competed in the Suntrip race on a back to back tandem solar powered row/cycle trike. 550 watt solar roof, dual Grin All Axle hub motors, dual Phaserunner controllers, 12 LiGo batteries, and a whole wack of gear.

Now back in Vancouver learning to be a dad with my Big Dummy Frame (yes This One, thanks ES!) with GMAC 10T rear hub motor, Phaserunner controller, and 52V 19Ah EM3EV pack
My website: http://www.ebikes.ca
Please contact via email, info@ebikes.ca, rather than PMs, which are disabled

User avatar
wesnewell   100 GW

100 GW
Posts: 7168
Joined: Jan 31 2011 6:25pm
Location: Wylie, TX, USA

Re: Yet more Server Upgrades! October 29th at 00:00 PDT

Post by wesnewell » Oct 26 2012 10:39am

If you haven't already considered it, please, please make it mandatory for new users to fill in the location field when registering. This will avoid tons of problems and wasted post.
Need Advice? https://endless-sphere.com/forums/viewt ... =3&t=66302
Mongoose 26" Ledge 2.1 mtb bike $99, yescomusa.com 48V 1000W rear hub kit $200, Hua Tong 72V 40A controller $35, 10ah 24s lipo $217=~43mph, range=45 miles @ 20mph. 25K miles and still going strong.
Huffy Fortress 3.0 with MXUS 3000 4T motor, 24s lipo, 96V 60A controller. Total cost with extras <$700. Top speed ~50mph
My videos https://www.youtube.com/channel/UC0KW4U ... _G2wQhptMg

mrvass   10 W

10 W
Posts: 88
Joined: Apr 21 2011 4:32pm
Location: Vancouver, BC
Contact:

Re: Yet more Server Upgrades! October 29th at 00:00 PDT

Post by mrvass » Oct 26 2012 5:09pm

wesnewell wrote:If you haven't already considered it, please, please make it mandatory for new users to fill in the location field when registering. This will avoid tons of problems and wasted post.
Great suggestion wesnewell, we'll test it out!
2807 NC Hub on 700c wheel x 20A Infineon controller x 48V 8Ah LiMn Ezee on a basic Norco hybrid bike

mrvass   10 W

10 W
Posts: 88
Joined: Apr 21 2011 4:32pm
Location: Vancouver, BC
Contact:

Re: Yet more Server Upgrades! October 29th at 00:00 PDT

Post by mrvass » Oct 29 2012 1:57am

The update is going to be delayed a bit, as it seems pulling the backup off the server is taking a bit longer than expected. Please expect a board outage around 00:30 PDT, though it seems like we can expect the changes to be finished before 02:00 PDT as before!
2807 NC Hub on 700c wheel x 20A Infineon controller x 48V 8Ah LiMn Ezee on a basic Norco hybrid bike

Post Reply