Hey Guys,
When I crimp female JST terminals (which are very short length) the raised pin that sticks out (the one that locks it into the plastic connector) is being flattened to a point it's one with the rest of the terminal and can't be lifted.
It's a problem only with those short terminals since longer terminals have the raised locking pin further away from the part that is being crimped.
What am I doing wrong?
This is the crimper:
http://www.ebay.com/itm/SN-28B-Pin-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
These are the terminals:
http://www.ebay.com/itm/500pcs-2-54...7af2173&pid=100005&rk=2&rkt=6&sd=262136738875
When I crimp female JST terminals (which are very short length) the raised pin that sticks out (the one that locks it into the plastic connector) is being flattened to a point it's one with the rest of the terminal and can't be lifted.
It's a problem only with those short terminals since longer terminals have the raised locking pin further away from the part that is being crimped.
What am I doing wrong?
This is the crimper:
http://www.ebay.com/itm/SN-28B-Pin-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
These are the terminals:
http://www.ebay.com/itm/500pcs-2-54...7af2173&pid=100005&rk=2&rkt=6&sd=262136738875
