Hwy89 wrote: ↑Nov 26, 2017 11:06 amIn many cases it is a single red wire (possibly the wire with no terminal in your photo) that can be connected to battery positive through a switch that will turn the controller on.
Ok I try doing some attempts, I'll let you know just done.
meanwhile, thank you very much
markz wrote: ↑Nov 26, 2017 1:47 pmTry the red wire with its end stripped showing bare wire near the middle, then try the red wire to the far left with the lug (or loop) connector.
What is the green wire, with the green connector housing, I have similar on my hksunwin controller.
thanks also to you, I will try doing some attempts, I'll let you know just done.