A conversion project from A to Z

MotionBlur

1 mW
Joined
Dec 12, 2017
Messages
11
Hi! I am new here. In the coming time I want to convert two bikes. I think I know what I am doing but there will probably some pitfalls too. Hope someone here can prevent me from doing stupid things - in time.

For others to learn I will write down information and will publish milestones.

The project page is here: http://www.vanderworp.org/Conversion_to_eBike

The first thing I want to share is a hack to make big batteries with a Sunkko: http://www.vanderworp.org/Sunkko_787A_Hack
 
From your links, guessing German maybe Austria?

Click on your nick name below the search on the top bar, click on user control panel, click profile tab, go to Location and enter it. I used to have just the country, but I since added the province/state and country.
 
Interesting, NL, Netherlands, location does not show up, at least, I don't see it. Well, that is where I live. markz, you were close, it is somewhere between Germany and the UK :)
 
And an update, http://www.vanderworp.org/PAS_Hack hopefully solves a problem with a PAS that does not fit.

Question: Does anyone know if PAS works in in two directions? I think I have to mirror the solution, not sure, no experience, bikes still don't run.
 
MotionBlur said:
And an update, http://www.vanderworp.org/PAS_Hack hopefully solves a problem with a PAS that does not fit.

Question: Does anyone know if PAS works in in two directions? I think I have to mirror the solution, not sure, no experience, bikes still don't run.

PAS should only work in one (forward) direction. So when you would back pedal it won't cause the bike to propel forward. Look at the arrows on the magnet disk for the correct rotation orientation.
 
Thanks SlowCo, it is a bit contrary to what I assumed. It also means the polarity of the poles passing the sensor will become different. Hope that is not a show stopper.
 
Back
Top