Hey there,
I have the following setup:
Kelly Controller KBS48121L (Motor Current Limit, 1 minute: 120A, Motor Current Limit, continuous: 50A)
Battery: 48V 30Ah 1440W
Motor: Crystalyte 2000W
Now I'm looking for the right settings:
- Under Voltage: 40V
- Over Voltage: 60V
Is that correct?
I'm using regen with started by a brake switch (12V on BRK2 controller input, coming from the brake lights).
- Regen Current by Brake Switch On: 50%
- Regen Current by Brake Switch On: 100%
Is that to much for my setup or is it ok?
Thank you for your help!
Cheers
Marco
I have the following setup:
Kelly Controller KBS48121L (Motor Current Limit, 1 minute: 120A, Motor Current Limit, continuous: 50A)
Battery: 48V 30Ah 1440W
Motor: Crystalyte 2000W
Now I'm looking for the right settings:
- Under Voltage: 40V
- Over Voltage: 60V
Is that correct?
I'm using regen with started by a brake switch (12V on BRK2 controller input, coming from the brake lights).
- Regen Current by Brake Switch On: 50%
- Regen Current by Brake Switch On: 100%
Is that to much for my setup or is it ok?
Thank you for your help!
Cheers
Marco