Hi,
i have two "36v 300w" brushless motors (attached to wheel) off two separate EScooters and also the two non-powered wheels from the front. the controllers from both bikes are unusable and the batterys from both "Li-ion 36.5v664.3Wh, 18200mAh" are currently disassembled and needing to be rebuilt with new bms boards.
i would like to use these 4 EScooter wheels to create a 4 wheeled EV using two separate controllers and one throttle. i would also think i could connect both controllers to one battery but this is where i am having trouble.
would anyone know what kind of battery i would need to power this, i have seen info saying i need to double the voltage and other info saying to keep the voltage and double the current.
the controllers i am thinking of using are these ones here:
https://www.ebay.com.au/itm/2746601...PN1yisUS2elUfQ%3D%3D|ampid:PL_CLK|clp:2334524
could anyone input what type of battery you think would be needed to run both motors without loss of speed or power as i will need to put it together myself and am getting quite lost, if anyone has nay thoughts on if the controllers sound appropriate it would be appreciated as well. thanks.
i have two "36v 300w" brushless motors (attached to wheel) off two separate EScooters and also the two non-powered wheels from the front. the controllers from both bikes are unusable and the batterys from both "Li-ion 36.5v664.3Wh, 18200mAh" are currently disassembled and needing to be rebuilt with new bms boards.
i would like to use these 4 EScooter wheels to create a 4 wheeled EV using two separate controllers and one throttle. i would also think i could connect both controllers to one battery but this is where i am having trouble.
would anyone know what kind of battery i would need to power this, i have seen info saying i need to double the voltage and other info saying to keep the voltage and double the current.
the controllers i am thinking of using are these ones here:
https://www.ebay.com.au/itm/2746601...PN1yisUS2elUfQ%3D%3D|ampid:PL_CLK|clp:2334524
could anyone input what type of battery you think would be needed to run both motors without loss of speed or power as i will need to put it together myself and am getting quite lost, if anyone has nay thoughts on if the controllers sound appropriate it would be appreciated as well. thanks.