NEED HELP to upgrade stock controller INOKIM QUICK 3

General Discussion about large electric scooters and motorcycles and other things with no pedals.
Post Reply
leoleaf   1 mW

1 mW
Posts: 15
Joined: Mar 25 2017 5:09am

NEED HELP to upgrade stock controller INOKIM QUICK 3

Post by leoleaf » Mar 25 2017 5:22am

I am new to this. Can someone more knowledgeable than me help me find a compatible controller for my INOKIM Quick 3 electric scooter.
I am looking on Alibaba to find one that is: 48v 500w programmable sine wave controller to replace stock controller.
According to documentation, the Q3 is rated at 400w but dont know what the peak watt is.

Goals:
- to increase max speed to up to 22mph (35kms). Stock controller limits speed to 30kph. At 30kph, the power cuts off.
- sine wave controller for less noise more efficiency

121jiggawatts   10 µW

10 µW
Posts: 6
Joined: Mar 19 2015 1:28am

Re: NEED HELP to upgrade stock controller INOKIM QUICK 3

Post by 121jiggawatts » Nov 08 2017 3:43am

You could purchase a phase runner from GRIN Tech. I've fitted one to a QUICK 3 before and re-wired the throttle etc to a Cycle Analyst. The phase runner will easily fit in the recess where the "stock" controller sits. It runs very silent and no speed limit.Only issue is the phase runner is $295USD. Cheap, low quality Chinese made controllers are $40.

User avatar
zogthegreat   10 W

10 W
Posts: 82
Joined: May 13 2014 3:25pm
Location: Montreal, Canada

Re: NEED HELP to upgrade stock controller INOKIM QUICK 3

Post by zogthegreat » Nov 10 2017 4:22pm

Hi leoleaf,

My favorite replacement throttle/controller is this:

https://www.ebay.com/itm/162311317469?s ... 1436.l2649

It's really easy to hook up and gives very solid performance. At $30.00 USD, it's considerably cheaper than a stock controller for your scooter!

I hope this helps.

zog
1st computer I used - Tandy TRS-80, 1st computer I owned - IBM PC-XT, 1st computer I fried - IBM XT-286

Pulse Charger Revolution, current stock w/ lead-acid batteries, (soon to change......)
Razor E300, modded with YK41B, Unite 36v 1000w, disc brakes

Post Reply