Hey folks
Just want to run this past the brains trust here before I go ahead.
I've bought a Domino full twist throttle and looking at the wiring it says;
Blue: 5V
White: GND
Black: Sensor (Potentiometer)
1 Green has to be connected to 5V
On my controller I have 3 wires for throttle and they say;
Red wire 4.3V,
Green wire 0.8V - 3.7v
Black wire 0V at Static
I'd just like to confirm the correct wiring if someone can help.
Is it -
blue and one green (on domino) to my controllers red wire
White (on domino) to black wire on my controller
Black (on domino) to green wire on my controller
Thanks in advance
Just want to run this past the brains trust here before I go ahead.
I've bought a Domino full twist throttle and looking at the wiring it says;
Blue: 5V
White: GND
Black: Sensor (Potentiometer)
1 Green has to be connected to 5V
On my controller I have 3 wires for throttle and they say;
Red wire 4.3V,
Green wire 0.8V - 3.7v
Black wire 0V at Static
I'd just like to confirm the correct wiring if someone can help.
Is it -
blue and one green (on domino) to my controllers red wire
White (on domino) to black wire on my controller
Black (on domino) to green wire on my controller
Thanks in advance