badboy1999
1 mW
To star off, this is a Biro:
A friend of mine acquired one of these with a broken controller for very cheap. Now the plan is to repair it. It has two engines, in the rear wheels, and a removable 48V battery. Peak power is supposed to be 4000w.
I'm thinking of two Kelly controllers for 48v and lots of amps (200A, should cost about $200*2 fed by one cycle analyst ($140) and a common throttle.
Of course both these controllers will be properly fused, it will get a killswitch, and possibly the brake signal will be fed to the cycle analyst as well to interrupt the throttle.
Thoughts?
A friend of mine acquired one of these with a broken controller for very cheap. Now the plan is to repair it. It has two engines, in the rear wheels, and a removable 48V battery. Peak power is supposed to be 4000w.
I'm thinking of two Kelly controllers for 48v and lots of amps (200A, should cost about $200*2 fed by one cycle analyst ($140) and a common throttle.
Of course both these controllers will be properly fused, it will get a killswitch, and possibly the brake signal will be fed to the cycle analyst as well to interrupt the throttle.
Thoughts?