I am trying to pair a new Sabvoton controller with a Sunra Motor - the model no is XR3000W72V15008002.
The issue I am having is with pairing the hall sensors to the controller.
I have tried all combinations of hall phasing and motor phasing but it keeps failing.
When I rotate the wheel the hall status field varies from 0 to 7. I have read elsewhere that 0 and 7 are bad but I do not know why.
Has anyone got any suggestions for a workaround before I send the controller back?
yes i have set it as a 60 deg setup - the test gear shows it as a 60 deg and the oem controller indicates 60 degs.
Do you suggest set the software to 60 then swap hall sensor signals and motor phase signals until I get a working set up and ignore the hall sensor setup?