Uberscoot1000w
1 µW
- Joined
- Jul 10, 2018
- Messages
- 3
Hoping someone can help me with my electric scooter.
i have a 36v s1000w uber scoot that took a fall and damaged the throttle, i bought a replacement throttle with no luck of getting it working.
I recently bought a volt meter and have since learnt how to use it. i have tested my throttle with a 4.5v battery supply and it seems to works fine.
My question is when testing the the 5v+, GND, Signal line coming from the controller am i expected a higher voltage reading as in 1v to 5v, i only got a 0.3v signal.
Does this mean i need a new controller or is it a function of my old throttle which was a wuxing 122dx.
I v tried removing break cables from controller so they dont interfere
The replacement throttle is not a correct match but im hopeful.
iv ordered a new hall effect sensor for my original throttle in the hopes of fixing it.
The wuxing 122dx has 7 wires and a standard throttle has 5 wires i left the 2 extra wires which seem to be for electric display
running off the indicator line on the controller which testes at 36v .. iv tried all ways around hoping iv missed something, im starting to think its the controller as well as the original throttle.
ill post pictures AsAp...
Any help would be well appreciated
mario
i have a 36v s1000w uber scoot that took a fall and damaged the throttle, i bought a replacement throttle with no luck of getting it working.
I recently bought a volt meter and have since learnt how to use it. i have tested my throttle with a 4.5v battery supply and it seems to works fine.
My question is when testing the the 5v+, GND, Signal line coming from the controller am i expected a higher voltage reading as in 1v to 5v, i only got a 0.3v signal.
Does this mean i need a new controller or is it a function of my old throttle which was a wuxing 122dx.
I v tried removing break cables from controller so they dont interfere
The replacement throttle is not a correct match but im hopeful.
iv ordered a new hall effect sensor for my original throttle in the hopes of fixing it.
The wuxing 122dx has 7 wires and a standard throttle has 5 wires i left the 2 extra wires which seem to be for electric display
running off the indicator line on the controller which testes at 36v .. iv tried all ways around hoping iv missed something, im starting to think its the controller as well as the original throttle.
ill post pictures AsAp...
Any help would be well appreciated
mario