Custom Torque Arms designed and fabricated

A place to list links to sources for EV related parts and services.

Custom Torque Arms designed and fabricated

Postby teslanv » Sat Oct 22, 2016 5:38 pm

Image

After designing a few different torque arms for various bike frames, I have a pretty good grasp on technique and attachment method.

Generally, I like to use 1/4" thick 316 Stainless Steel, as it seems to be strong enough for most applications, and is readily available from my various sources.

To date, I have designed Custom Torque arms for the following Bike Frames, and all are available for sale:


You can purchase any of the above by sending me a PM. Prices range from $50 to $100, shipped.

For bikes not listed above, I will do my best to design and fabricate a set of custom torque arms for your frame. What I will need is a couple good photos, which I can import into my CAD software, and scale accurately. The best way to do this is to take a high resolution photo, straight on shot of each side of your bike's drop-outs, with a metric scale/ruler near the drop-out slots. (See Example Photos below). The metric ruler helps me to size the photo accurately in CAD. I then will engineer a profile for you to review. It will first be mailed to you as a PDF file for you to print, and model up within your frame. If all looks good, I will add your torque arms to my next batch of parts. This process will generally take 4-6 weeks. Cost for new designs will run about $300 for the first set, and $125 for additional sets of the same design, including shipping.

Send me a PM for more info.

TA Example 1.jpg
TA Example 1.jpg (118.43 KiB) Viewed 1022 times

TA Example 2.jpg
TA Example 2.jpg (182.58 KiB) Viewed 1022 times

CAD 1.JPG
CAD 1.JPG (54.97 KiB) Viewed 1022 times

CAD 2.JPG
(59.9 KiB) Downloaded 11 times

TA-Left.jpg
TA-Left.jpg (184.58 KiB) Viewed 1022 times

TA-Right.jpg
TA-Right.jpg (184.37 KiB) Viewed 1022 times
Last edited by teslanv on Sun Jul 02, 2017 11:10 am, edited 4 times in total. View post history.
First Build: "Craigslist Hardtail"
Signature Build: "Assault & Battery"
Fastest Drag Bike: "Vector/QS205/Sabvoton"
Current favorite: "Super Deluxe IGH BBS02"
Spoiling my Children with an E-BMX
User avatar
teslanv
100 MW
100 MW
 
Posts: 2800
Joined: Sun Nov 03, 2013 8:42 pm
Location: Bellevue, WA - USA

Re: Custom Torque Arms designed and fabricated

Postby spinningmagnets » Sat Oct 22, 2016 7:06 pm

This is awesome, and way overdue. Thanks for providing this service, Barent.
User avatar
spinningmagnets
100 GW
100 GW
 
Posts: 10602
Joined: Fri Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Re: Custom Torque Arms designed and fabricated

Postby teslanv » Sat Dec 10, 2016 3:18 pm

Here is the latest custom project.

It's a Redline Monocog Flight 29er, that the owner calls "Kermit".

http://redlinebicycles.com/bikes/2014-monocog-flight/

These are 3D Printed prototypes used to test fit for proper geometery. This set is good to go. Next step is to order the waterjet cut Stainless parts.

This bike will be getting a 6T (6Kv) MXUS 3K-Turbo motor.
Redline_Monocog.jpg
Redline_Monocog.jpg (199.28 KiB) Viewed 885 times

Redline_Monocog_2.jpg
Redline_Monocog_2.jpg (183.41 KiB) Viewed 885 times
First Build: "Craigslist Hardtail"
Signature Build: "Assault & Battery"
Fastest Drag Bike: "Vector/QS205/Sabvoton"
Current favorite: "Super Deluxe IGH BBS02"
Spoiling my Children with an E-BMX
User avatar
teslanv
100 MW
100 MW
 
Posts: 2800
Joined: Sun Nov 03, 2013 8:42 pm
Location: Bellevue, WA - USA

Re: Custom Torque Arms designed and fabricated

Postby Suggs » Sun Dec 11, 2016 4:38 pm

Great work Barent. In the middle of designing and making my own custom torque arms and it's not easy.

I'm sure you've already tried but can the axle nuts fit on? Looks a bit tight for space on the photos but the angle isn't quite right to be able to tell.
Suggs
100 W
100 W
 
Posts: 226
Joined: Wed Sep 16, 2015 3:42 pm
Location: Yorkshire, UK

Re: Custom Torque Arms designed and fabricated

Postby teslanv » Sun Jul 02, 2017 11:09 am

Add another frame to the list:

Motobecane 529HT from here: http://www.bikesdirect.com/products/mot ... nbikes.htm

Plastic Prototypes fit nicely. Fits M16 Axles and smaller. Just wait till you see the motor that this bike will be getting. :)

529HT Prototype Small.jpg
529HT Prototype Small.jpg (147.61 KiB) Viewed 223 times


Motobecane 529HT - Small.jpg
Motobecane 529HT - Small.jpg (117.86 KiB) Viewed 223 times
First Build: "Craigslist Hardtail"
Signature Build: "Assault & Battery"
Fastest Drag Bike: "Vector/QS205/Sabvoton"
Current favorite: "Super Deluxe IGH BBS02"
Spoiling my Children with an E-BMX
User avatar
teslanv
100 MW
100 MW
 
Posts: 2800
Joined: Sun Nov 03, 2013 8:42 pm
Location: Bellevue, WA - USA

Re: Custom Torque Arms designed and fabricated

Postby tomjasz » Sun Jul 02, 2017 11:25 pm

Electra Townie. Pretty please.
Or another generic design with more posdible uses like Dr Bass!
My Gravity DeadEye Monster set are fantastic.
Last edited by tomjasz on Sun Jul 02, 2017 11:26 pm, edited 1 time in total. View post history.
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.
User avatar
tomjasz
1 GW
1 GW
 
Posts: 3486
Joined: Sat Mar 29, 2014 1:45 pm
Location: Out riding, MN USA


Return to Resources & EV Related Parts and Services

Who is online

Users browsing this forum: No registered users and 1 guest