Shimano XT brake cuttoff sensor holder for download (3D printable)

[CaptainCodswallop]

Hi All

I created a holder for brake sensor cuttoffs that works with shimano XT brakes. No glueing it simply fixes via compression onto the rubber part of the XT brake housing. It works with a fairly common type of brake cuttoff that is supplied by a few vendors. I got mine with my kit from CYC motors.

If people would like me to vary the design to accept different types and sizes of brake cuttoffs I should be able to do so fairly easily.

To print the part you need to take the STL file to a 3D printing place where they can convert it to G Code. Or if you have a 3D printer you can use Cura to do the same which is a free bit of software. If you have any questions shoot me a message.

You can see it in action here -

https://www.youtube.com/watch?v=1VY7EyHQ-h0&t=9s

All I ask is maybe give me a sub or a like on my channel and let people know where you got it from!

Link to the STL file - https://www.dropbox.com/s/99yogaus01ime ... r.stl?dl=0
Link to a picture of the part - https://www.dropbox.com/s/c14288hmt1cgz ... .jpeg?dl=0

Hope this is of use to some people!

Cheers

CC

[1N4001]

Looking good! Might just be what I need for my Zees. Thanks!