Page 19 of 19

Re: Suzuki GSX-R e899 K2

Posted: Oct 22 2020 5:51am
by Rovii
Cabling is near to finish.
Starting now with parameterisation ...

Re: Suzuki GSX-R e899 K2

Posted: Oct 23 2020 2:44pm
by Rovii
So it’s alive ...
[youtube]_px04JXn2i8[/youtube]

Re: Suzuki GSX-R e899 K2

Posted: Oct 23 2020 3:45pm
by Frank
Congratulations - that is a big step!

Re: Suzuki GSX-R e899 K2

Posted: Oct 26 2020 12:32am
by Rovii
Thanks Frank,
yes I was so happy to get it working!
In meantime I also did now the atomatic resolver tuning and the offset went from 0 to -127
So next steps will be to build the battery boxes and some minor stuff.

Re: Suzuki GSX-R e899 K2

Posted: Nov 18 2020 6:25am
by Rovii
Met the Taycan 4S.
An absolutely fantastic car in performance and cornering.

Re: Suzuki GSX-R e899 K2

Posted: Nov 30 2020 12:42pm
by Rovii
Made now the first ride ... only at 30A phase current but that was enough for cruising at 125VDC.
I calculated 60 kph at no load and reached 40,9 kph at the end.

Re: Suzuki GSX-R e899 K2

Posted: Dec 02 2020 4:28am
by Haggan90
Hi Andre (nice name btw)
What's your current spec on motor and controller?

Re: Suzuki GSX-R e899 K2

Posted: Dec 02 2020 9:13pm
by Rovii
Thanks,
Well the motor is from Phi Power AG. It’s a PhE381 with 200kW peak power for 20 seconds, 6000 rpm and 640Nm of torque.
The controller is from Scott Drive. Model SD300. Operating with max of 800VDC and forwarding up to 600ARMS phase current to the motor, so the type of model is listed with 400kVA and already tested with 340kW output power in combination with a Remy HV250 on a test bench by manufacturer.
I will start slowly with the power by increasing current and voltage step by step.

Re: Suzuki GSX-R e899 K2

Posted: Dec 04 2020 8:06pm
by Rovii
Check out the video clip:
[youtube] https://www.youtube.com/watch?v=61hLdsg ... ture=share[/youtube]

Re: Suzuki GSX-R e899 K2

Posted: Dec 05 2020 2:23pm
by SlowCo

Re: Suzuki GSX-R e899 K2

Posted: Aug 17 2021 12:13am
by Rovii
A long time you don’t hear something about my actually status.
There are still some tiny open points to manage.
E. g. I got now the right controller software to start with higher current runs and I successfully installed it




But before I start with this tests I will rebuild the bike ….

Re: Suzuki GSX-R e899 K2

Posted: Oct 06 2021 7:46am
by Rovii

Re: Suzuki GSX-R e899 K2

Posted: Oct 07 2021 9:16am
by Rovii
Totally dissembled!

Re: Suzuki GSX-R e899 K2

Posted: Oct 07 2021 9:23am
by Frank
Why?

Re: Suzuki GSX-R e899 K2

Posted: Oct 07 2021 10:04am
by Rovii
Rust at the Steel adapter plates and the frame need some welding and color …

Re: Suzuki GSX-R e899 K2

Posted: Oct 07 2021 10:05am
by Merlin
will that thing ever see a dragstrip? ^^

Re: Suzuki GSX-R e899 K2

Posted: Oct 07 2021 11:20am
by Rovii
Next year, why?

Re: Suzuki GSX-R e899 K2

Posted: Oct 09 2021 6:09am
by Rovii
Now the rest is welded and can be forward to the painter by next week …

Re: Suzuki GSX-R e899 K2

Posted: Oct 11 2021 10:30pm
by Rovii
Got already back the battery boxes …

Re: Suzuki GSX-R e899 K2

Posted: Oct 14 2021 10:34am
by Rovii
The motor will also be colored a little bit by myself :lol:

Re: Suzuki GSX-R e899 K2

Posted: Oct 15 2021 8:04am
by Rovii
Finished 8)