1987 Honda xr200 and other custom bikes

Show off your E-Scooter or Motorcycle creation here.
Post Reply
1 µW
1 µW
Posts: 1
Joined: May 17, 2017 7:45 pm

1987 Honda xr200 and other custom bikes

Post by Buildingbikes » May 17, 2017 8:40 pm

I am a senior in high school and have been building bikes for two years now. It started when I could not get a dirt bike because they were too "dangerous" so I built an e bike.
It was my first ebike so it was not all that good and took longer than it should have taken.
img 1 re.jpg
img 1 re.jpg (93.82 KiB) Viewed 697 times
img2 re.jpg
img2 re.jpg (98.33 KiB) Viewed 697 times

My second bike was a small 50 cc dirt bike conversion it took me a few days
50 cc frame
48 volt 20 ah battery
3 kw golden motor and controller
IMG_3474.JPG (114.46 KiB) Viewed 697 times

My third bike was for a senior project it took three month and I was working till the last hour. It is a full custom frame
full custom frame
big block motor and compatible controller
48 volt 20 ah battery
1.JPG (68.38 KiB) Viewed 697 times
2.jpg (83.15 KiB) Viewed 697 times
(27.42 KiB) Downloaded 5 times
(113.22 KiB) Downloaded 5 times
5.JPG (55.86 KiB) Viewed 697 times
bike v8.jpg
(109.21 KiB) Downloaded 5 times
bike 3 re.png
bike 3 re.png (148.52 KiB) Viewed 697 times
img2.jpg[/attachment My latest bike is a 1987 Honda xr 200 I got the bike frame for free because someone likes what I have been doing 3 kw golden motor 72 volts and 34.8 amp hours [attachment=5]IMG_6539.PNG
IMG_6564.JPG (105.46 KiB) Viewed 697 times
IMG_6576.JPG (87.56 KiB) Viewed 697 times
IMG_6701.JPG (136.88 KiB) Viewed 697 times
I am having some trouble, as i ride and get moving the throttle cuts out can anyone help please?
and also it has trouble getting up hills it currently has a 64 tooth rear sprocket would it be logical to but a 120 tooth on?
Sorry for the out of order photos.
img2.jpg (120.85 KiB) Viewed 690 times
Last edited by Buildingbikes on May 17, 2017 8:59 pm, edited 1 time in total.

Post Reply