adamjs16@gmail.com
10 µW
- Joined
- May 16, 2021
- Messages
- 6
I am building my first pack. It is a 14S6P pack that needs to output 30A, but I would like to be able to output 60A, for future proofing. I'm using Molicel P42A cells.
Unfortunately I had to deviate from the usual square shape, to fit the battery below the top tube. Will the wiring layout I designed work?
Please see attachments for details. I would appreciate any advice you have.
Key:
Red - 10AWG bare wire (acting as busbar)
Blue - 0.15mm x 15mm pure nickel strips
Unfortunately I had to deviate from the usual square shape, to fit the battery below the top tube. Will the wiring layout I designed work?
Please see attachments for details. I would appreciate any advice you have.
Key:
Red - 10AWG bare wire (acting as busbar)
Blue - 0.15mm x 15mm pure nickel strips