10s BMS to JST adapters

xmuf

1 mW
Joined
Apr 25, 2021
Messages
13
pic 1) daly BMS has 11 wires and the JST’s have 6, is this correct?. bottom Lipo is main negative and top is main positive, two 5s Lipos

pic 2) the BMS wires will be soldered to a JST adapter first. would it be safer to heat shrink the excess wire or remove the pin, assuming the first diagram is correct
 

Attachments

  • Screen Shot 2021-06-13 at 12.27.31 pm.png
    Screen Shot 2021-06-13 at 12.27.31 pm.png
    3.5 KB · Views: 158
  • Screen Shot 2021-06-13 at 12.49.25 pm.png
    Screen Shot 2021-06-13 at 12.49.25 pm.png
    2.4 KB · Views: 158
Back
Top