DefconExile
10 mW
- Joined
- Jun 27, 2022
- Messages
- 21
Hi guys , so little rundown I’m wanting to create a 48v 40ah+ battery for my e bike , I’ve mocked up a design on some paper creating 13 groups of 8 cells and was wondering if anybody on here could clarify weather this is a possible design. And also if someone could add if it’s ok the connect these cells in this fashion up in parallel first then series. Another thing I’ll mention is the design may be hard to understand but Surrounded each group of cells with a highlighter so people can determine which cells is part of which group , any input is greatly appreciated this is my first endeavour creating something like this and the design was taken from a larger 13S10P pack however this won’t fit in my bike if I use 21700s
as opposed to 18650 (the cells I’ll be using are 4800mah 21700s)
as opposed to 18650 (the cells I’ll be using are 4800mah 21700s)