another lipo case idea

karma · Nov 17, 2011

recycling is good. if anyone has one of these battery pack laying around they make a good case for lipo. :wink:

[youtube]Te0W3ThOR5k[/youtube]

chroot · Nov 17, 2011

It looks excellent, You might want put protection I.E. shielded on wall due the pivot or screw type might pierce the LiPo's side. I like it.

karma · Nov 17, 2011

yup theirs going to be a lot of padding inside. rivets will be sanded down with felt glued down with rubber cement. sides and corner of the box will have a rubber covering on any cut metal :wink:

neptronix · Nov 18, 2011

Brilliant as always!!

karma · Nov 27, 2011

ok its finished. i used fiberglass sheets foam and rubber on any sharp edges. cells are tight no movement :wink:

it one way to recycle old cases :mrgreen:

now just to mount it.

cheers

[youtube]Eh7f7BfObn8[/youtube]

fechter · Nov 27, 2011

Cool.

What are the vacuum tubes for? A really high voltage controller?

karma · Nov 28, 2011

heh ya retro controller with a plate voltage around 400volts :mrgreen:

another lipo case idea

karma

10 kW

chroot

100 kW

karma

10 kW

neptronix

Administrator

karma

10 kW

fechter

Administrator

karma

10 kW

Similar threads