Page 8 of 8

Re: Speedict neptune lite

Posted: Feb 22 2021 6:09pm
by cheeko
speedict wrote:
Dec 13 2020 11:21pm
cheeko wrote:
Dec 13 2020 6:02pm
So i just got email after 2 years the Netptune 20S is ready,

what are the real benifets im currently using a ANT BMS and i know somepeople say there crap but after 2 years not one cell is out and it runs perfect.

Only reason i can see to upgrade would be size of the unit.

Tell me some cool features please

Regards
Peter W
Sorry we don't know about ANT BMS's features and we believe features can be enhance via both software and firmware upgrade.
Most of our efforts were spent on hardware design such as size, hardware feature such as power take from top (highest) cell not other e.g. cell #3 to prevent long-term cell imbalance (I am not sure other BMS also take power from highest cell).

regards,

Danny
Its very tempting but not cheap, Ant BMS does show you invidiul cell voltage

But yes i think size factor this could be good option

Re: Speedict neptune lite

Posted: Feb 22 2021 6:13pm
by cheeko
Hi Guys

if im to buy do i get firmware and hardware? time to upgrade the ANT BMS i think

Re: Speedict neptune lite

Posted: Feb 22 2021 9:04pm
by speedict
cheeko wrote:
Feb 22 2021 6:13pm
Hi Guys

if im to buy do i get firmware and hardware? time to upgrade the ANT BMS i think
sorry about the mis-leading / confusion information on our website, yes, you need to buy both FW and SW together, the reason why split into FW and SW because of import TAX issues, we will change it back later this week.

regards,

Danny

Re: Speedict neptune lite

Posted: Feb 23 2021 6:55pm
by cheeko
Thanks heaps, whats lead time to Australia considering it for my Stealth Beta

Re: Speedict neptune lite

Posted: Feb 23 2021 10:05pm
by speedict
cheeko wrote:
Feb 23 2021 6:55pm
Thanks heaps, whats lead time to Australia considering it for my Stealth Beta
it is hard to tell because it's depended on Australia's local postage service lead time especially in COVID time, however to Australia use DHL from Hong Kong is cheaper than post to west.
you can PM your address with post code, I can check the DHL price, we can offer you discount on NEPTUNE 20 if you select DHL.



Danny

Re: Speedict neptune lite

Posted: Mar 01 2021 5:30am
by titan_rw
Hello.

Looking at the website, the difference between the Netptune 15 ver 1, and the normal neptune 15 is not very clear.

Can you elaborate on why the regular neptune 15 is $50 more than the ver 1?


Thanks.

Re: Speedict neptune lite

Posted: Mar 01 2021 9:06am
by speedict
titan_rw wrote:
Mar 01 2021 5:30am
Hello.

Looking at the website, the difference between the Netptune 15 ver 1, and the normal neptune 15 is not very clear.

Can you elaborate on why the regular neptune 15 is $50 more than the ver 1?


Thanks.
version 1 support discharge current limited by its SHUNT resistor up to 50A (or hand solder replace with 1mΩ to handle 100+A), and thicker than version 2 because of top 4 screws.

Danny

Re: Speedict neptune lite

Posted: Mar 01 2021 10:11am
by titan_rw
speedict wrote:
Mar 01 2021 9:06am

version 1 support discharge current limited by its SHUNT resistor up to 50A (or hand solder replace with 1mΩ to handle 100+A), and thicker than version 2 because of top 4 screws.

Danny
Thanks.

50 amps will do for this battery, and I don't think the slightly thicker profile is going to be an issue.

Ordered a V1.

Re: Speedict neptune lite

Posted: Mar 01 2021 10:18am
by speedict
titan_rw wrote:
Mar 01 2021 10:11am
speedict wrote:
Mar 01 2021 9:06am

version 1 support discharge current limited by its SHUNT resistor up to 50A (or hand solder replace with 1mΩ to handle 100+A), and thicker than version 2 because of top 4 screws.

Danny
Thanks.

50 amps will do for this battery, and I don't think the slightly thicker profile is going to be an issue.

Ordered a V1.
do you want me to replace SHUNT resistor for 100+A ? if yes, please send message to us : contact@speedict.com with your order number or name


regards,

Danny

Re: Speedict neptune lite

Posted: Mar 01 2021 1:24pm
by titan_rw
speedict wrote:
Mar 01 2021 10:18am
do you want me to replace SHUNT resistor for 100+A ? if yes, please send message to us : contact@speedict.com with your order number or name


regards,

Danny
Thanks for the quick replies.

Email sent.

Re: Speedict neptune lite

Posted: Mar 02 2021 5:49am
by speedict
titan_rw wrote:
Mar 01 2021 1:24pm
speedict wrote:
Mar 01 2021 10:18am
do you want me to replace SHUNT resistor for 100+A ? if yes, please send message to us : contact@speedict.com with your order number or name


regards,

Danny
Thanks for the quick replies.

Email sent.


replaced with 1mΩ resistor and 12 AWG wire, will arrange shipment later tomorrow.

regards,

Danny

Re: Speedict neptune lite

Posted: May 14 2021 12:24pm
by cheapcookie
Hello speedict I need a 20s bms with preferably full vesc data integration? can your bms do it?

Re: Speedict neptune lite

Posted: May 14 2021 9:49pm
by speedict
cheapcookie wrote:
May 14 2021 12:24pm
Hello speedict I need a 20s bms with preferably full vesc data integration? can your bms do it?
we don't have UART port on Neptune 20 that's mean not possible to integrate VESC talk on Neptune 20, do you have 20s VESC controller ?



Danny

Re: Speedict neptune lite

Posted: May 21 2021 4:44pm
by cheapcookie
speedict wrote:
May 14 2021 9:49pm
cheapcookie wrote:
May 14 2021 12:24pm
Hello speedict I need a 20s bms with preferably full vesc data integration? can your bms do it?
we don't have UART port on Neptune 20 that's mean not possible to integrate VESC talk on Neptune 20, do you have 20s VESC controller ?



Danny
Yes my vesc works up to 84v

Re: Speedict neptune lite

Posted: May 26 2021 11:00am
by speedict
cheapcookie wrote:
May 21 2021 4:44pm
speedict wrote:
May 14 2021 9:49pm
cheapcookie wrote:
May 14 2021 12:24pm
Hello speedict I need a 20s bms with preferably full vesc data integration? can your bms do it?
we don't have UART port on Neptune 20 that's mean not possible to integrate VESC talk on Neptune 20, do you have 20s VESC controller ?



Danny
Yes my vesc works up to 84v
Neptune 20 is external UART ready, all we need to do is copy software from Neptune 15


Danny