ldmvcd
1 mW
Hello,
I've purchased a BMS rated at 35A 10S from ebay but the pack I am building is with Panasonic NCR18650PF 2900mAh - 10A batteries, 10S and 4P. Since the discharge of each battery is rated at 10A, I'm assuming that it will total 40A since there will be 4 in parallel? Do I have the math right?
Or do I need to get a BMS that is rated for 40A and above?
This is what I have purchased https://www.ebay.com/itm/10S-36V-Batterie-BMS-PCB-Li-Ionen-Akku-lipolymer-35A-Board-mit-Balance-for-Ebike/263071067098?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Is this what I should get? https://www.ebay.com/itm/BMS-PCB-for-36V-10S-45A-Li-ion-Lipolymer-Battery-with-BALANCE-for-ebike-escooter/172603662727?hash=item282ffae187:g:9uUAAOSwiBJaBCVZ
Thanks!
I've purchased a BMS rated at 35A 10S from ebay but the pack I am building is with Panasonic NCR18650PF 2900mAh - 10A batteries, 10S and 4P. Since the discharge of each battery is rated at 10A, I'm assuming that it will total 40A since there will be 4 in parallel? Do I have the math right?
Or do I need to get a BMS that is rated for 40A and above?
This is what I have purchased https://www.ebay.com/itm/10S-36V-Batterie-BMS-PCB-Li-Ionen-Akku-lipolymer-35A-Board-mit-Balance-for-Ebike/263071067098?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Is this what I should get? https://www.ebay.com/itm/BMS-PCB-for-36V-10S-45A-Li-ion-Lipolymer-Battery-with-BALANCE-for-ebike-escooter/172603662727?hash=item282ffae187:g:9uUAAOSwiBJaBCVZ
Thanks!