Hey guys,
I have a very strong spot welder that trips a 16A breaker all the time (220v grid) and I can't put a bigger breaker since the wires in the wall are not thick enough.
I was thinking, why don't I just take a solar power inverter (12v to 220v) that is capable for about 7-10kw and connect the inverter to a car battery (at home of course) and that way I can pull even 40A as the inverter below is rated for 10kw (probably peak but a pulse welder is pulse, not constant amp draw so...)
Like this one:
https://www.ebay.com/itm/10000W-Car...10000w+220v+inverter&LH_BIN=1&_from=R40&rt=nc
What do you guys think?
Would work as planned?
I have a very strong spot welder that trips a 16A breaker all the time (220v grid) and I can't put a bigger breaker since the wires in the wall are not thick enough.
I was thinking, why don't I just take a solar power inverter (12v to 220v) that is capable for about 7-10kw and connect the inverter to a car battery (at home of course) and that way I can pull even 40A as the inverter below is rated for 10kw (probably peak but a pulse welder is pulse, not constant amp draw so...)
Like this one:
https://www.ebay.com/itm/10000W-Car...10000w+220v+inverter&LH_BIN=1&_from=R40&rt=nc
What do you guys think?
Would work as planned?