Battery Connectors

A

automan25

100 mW

Joined

Feb 5, 2017

Messages

44

• Aug 24, 2018

• #1

The battery connector in my battery cradle failed. Does anyone know where I can find the type of connector shown in the link below? Also, I'm interested in instructions for how to replace the connector in a Jumbo Shark case.

http://www.ebikes.ca/downtube-connector.html

Thanks.

 

T

towodi63m

1 mW

Joined

Aug 13, 2018

Messages

14

• Aug 26, 2018

• #2

Hello,
Try https://lunacycle.com/batteries/connectors-and-wires/
I'm not sure they have the exact part you are looking for, but if not they may have something that you can use.
Hope this helps.

Towodi

 

A

automan25

100 mW

Joined

Feb 5, 2017

Messages

44

• Aug 26, 2018

• #3

I already spoke with Luna support and they said they do not have it. Thanks for the idea though.

 

docw009

1 MW

Joined

Aug 2, 2015

Messages

2,443

Location

Illinois, Not far from Wayne's World.

• Aug 27, 2018

• #4

These are 5 pin, but so you only use two if they fit, or double up on the pins.
https://california-ebike.com/shop/hailong3-new-style-case-connectors-set/

 

A

automan25

100 mW

Joined

Feb 5, 2017

Messages

44

• Aug 27, 2018

• #5

Those are the ones. Thanks.

 

T

towodi63m

1 mW

Joined

Aug 13, 2018

Messages

14

• Aug 30, 2018

• #6

Thanks for the help Automan25.

 

A

automan25

100 mW

Joined

Feb 5, 2017

Messages

44

• Aug 30, 2018

• #7

Rather than spend $20 on a connector that would likely fail again I decided to drill a hole in the end of my case and directly connect an XT90 connector to the battery output and then sealed the hole with silicone. I just mounted it back on the bike this evening and so far, so good.