Fmsplr
100 µW
I have a 14s2p w/samung 25r's w/52v 30a discharge bms
My vruzend charger will not kick on so I checked my battery volts and this what I have
#1- 3.61, #2- 3.63, #3- 3.60 #4- 0.4, #5- 0.4, #6- 3.63, #7-9 3.63 #10- 3.55, #11-13 3.62, #14-3.63
Pack voltage=43.4v
I bought 4 new Batts (25r) so my question is, do I need to bleed off the new battery's to 3.63v and replace the dead cells at #4 and #5 to get my charger to kick on? And replace my bms ?
To be honest I tried to bypass the bms because it kept shuting me down halfway to work so I hooked my charger straight to battery. Wrong thing to do I guess. Please help this is my only mode of transportation and I've been pondering what to do for a couple weeks now (bms or not to bms) I'm on information overload so I just want to replace the bms and battery's and get it running again (if possible) before I get fed up and throw 450.00 in the trash
My vruzend charger will not kick on so I checked my battery volts and this what I have
#1- 3.61, #2- 3.63, #3- 3.60 #4- 0.4, #5- 0.4, #6- 3.63, #7-9 3.63 #10- 3.55, #11-13 3.62, #14-3.63
Pack voltage=43.4v
I bought 4 new Batts (25r) so my question is, do I need to bleed off the new battery's to 3.63v and replace the dead cells at #4 and #5 to get my charger to kick on? And replace my bms ?
To be honest I tried to bypass the bms because it kept shuting me down halfway to work so I hooked my charger straight to battery. Wrong thing to do I guess. Please help this is my only mode of transportation and I've been pondering what to do for a couple weeks now (bms or not to bms) I'm on information overload so I just want to replace the bms and battery's and get it running again (if possible) before I get fed up and throw 450.00 in the trash