Using a Magura Throttle with hall effect controller

Archive of useful information. This is not a discussion area.
Post Reply
User avatar
fechter   100 GW

100 GW
Posts: 12909
Joined: Dec 31 2006 3:23pm
Location: California Bay Area, USA

Using a Magura Throttle with hall effect controller

Post by fechter » Jan 22 2013 10:13am

Page 1 of this topic shows how to use a Magura throttle with a typical hall effect input controller.
By using a pair of adjustable resistors, the throttle range can be 'dialed in' to minimize dead zones at either end of the throttle travel.

http://endless-sphere.com/forums/viewto ... 28&t=46891
"One test is worth a thousand opinions"

Post Reply