hi, CA EXPERTS, how can i make the CA show half voltage?

Get all your technical information about electric bikes here.
Post Reply
mudale222
10 W
10 W
Posts: 75
Joined: Jun 08, 2015 5:35 am

hi, CA EXPERTS, how can i make the CA show half voltage?

Post by mudale222 » Jul 17, 2017 3:35 pm

u know... the usual stuff.. cops and shit.. :evil:
it's v3 dp (connect straight to controller), tried to play with the rshunt value but watt changed and voltage stayed the same..
thx

User avatar
amberwolf
100 GW
100 GW
Posts: 23922
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: hi, CA EXPERTS, how can i make the CA show half voltage?

Post by amberwolf » Jul 17, 2017 5:06 pm

nm..
Last edited by amberwolf on Jul 17, 2017 8:39 pm, edited 1 time in total.

User avatar
Farfle
10 MW
10 MW
Posts: 2090
Joined: Jun 27, 2010 10:42 am
Location: Moscow, ID
Contact:

Re: hi, CA EXPERTS, how can i make the CA show half voltage?

Post by Farfle » Jul 17, 2017 5:14 pm

There is a voltage scaling feature in advanced setup used for calibration, It may function in a way that is useful to you.
The race bike:
24s5p 50c nano tech
Badass custom mofo outrunner 205x177mm 26kv
Peak power in : 420A at 87v
Peak power out: 34 Hp and 105ft/lb

Build to last...
"It will be assaulted by the elements, It will be ravaged by time and it will be destroyed by the user. BUT, if you Stick to the little rules: K.I.S.S., Overbuild everything, and test, review, revise, repeat. It will last"


Team Farfle blog!! http://www.farfleselectrics.blogspot.com

mudale222
10 W
10 W
Posts: 75
Joined: Jun 08, 2015 5:35 am

Re: hi, CA EXPERTS, how can i make the CA show half voltage?

Post by mudale222 » Jul 17, 2017 8:17 pm

Thx
The vscale combined with shunt and battery setup did it.

Post Reply