How to enable on/off switch of phaserunner v3?

Get all your technical information about electric bikes here.
Post Reply
ebikeman123   10 mW

10 mW
Posts: 24
Joined: Mar 26 2018 6:11am

How to enable on/off switch of phaserunner v3?

Post by ebikeman123 » Jul 21 2021 10:23am

I have peeled back the throttle cable fromt he phaserunner v3. There I found the white and yellow wires for the on/off switch. However, nothing happens when I connect or disconnect them. My multimeter also doesn't show the voltage across them.
Is there a way to enable these cables to work?

I have tried touching the bare wires together, but the phaserunner and cycleanalyst stay on whatever I do.

goatman   100 MW

100 MW
Posts: 2721
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: How to enable on/off switch of phaserunner v3?

Post by goatman » Jul 21 2021 11:51pm

i have one with the same problem, tried trouble shooting it here
viewtopic.php?f=49&t=111861&p=1659082&h ... e#p1658727

i wouldnt clip the red wire like the email i received from Grin suggested, i think that advice was wrong and never got a return email when i asked them if they confused the orange with the red, the orange was already cut

Post Reply