Ford Prefect
1 W
Hello E-S,
after I abandoned my "250W Tow Truck" for the moment ( https://endless-sphere.com/forums/viewtopic.php?f=3&t=99529 ) I am going to build a heavy but reliable commuter. The wife is going to pull the kids with her BoschBike.
I am somehow inclined to the MAC, since it has a huge fan base, and I get spare parts in the future. There is one thing I don't understand:
When configuring at em3ev the winds have approximate speeds: 10T is supposed to run 40kph at 48V (13S?) and 26". Which should result in something like 32 kph at 36V (10S) and 26", which would be rather ideal.
When I run the same system in the grin motor simulator I get 40kph at 36V (10S) and 26".
In the simulator the 12T runs about 30kph at 10S and 26".
What am I not getting here?
Most ES-Posters recommend both sites so I trust both. I guess in this case one of them has an error?
Which figure is correct?
Thanks,
Phil
after I abandoned my "250W Tow Truck" for the moment ( https://endless-sphere.com/forums/viewtopic.php?f=3&t=99529 ) I am going to build a heavy but reliable commuter. The wife is going to pull the kids with her BoschBike.
I am somehow inclined to the MAC, since it has a huge fan base, and I get spare parts in the future. There is one thing I don't understand:
When configuring at em3ev the winds have approximate speeds: 10T is supposed to run 40kph at 48V (13S?) and 26". Which should result in something like 32 kph at 36V (10S) and 26", which would be rather ideal.
When I run the same system in the grin motor simulator I get 40kph at 36V (10S) and 26".
In the simulator the 12T runs about 30kph at 10S and 26".
What am I not getting here?
Most ES-Posters recommend both sites so I trust both. I guess in this case one of them has an error?
Which figure is correct?
Thanks,
Phil