Page 1 of 1

Cycle Analyst V2.4 w/Shunt Confusion

Posted: Mar 25 2020 9:40pm
by danmar713
Hi!
I have a Cycle Analyst v 2.4
I believe I'm at the last stage of hooking up my shunt to the controller, the shunt I am using has three additional wires (green, yellow, black) though that's what I am confused about. Do I need to use these and how would I connect them? also is there an easy way to figure out pole count? Thanks !
ShuntWires.png
ShuntWires.png (195.83 KiB) Viewed 156 times

Re: Cycle Analyst V2.4 w/Shunt Confusion

Posted: Mar 26 2020 5:19am
by Hayds13
i dont think you need to use the 3 throttle wires for v2.4 CA, as your throttle will be directly connected to the controller. re pole count...maybe google your motor

Re: Cycle Analyst V2.4 w/Shunt Confusion

Posted: Mar 26 2020 3:21pm
by danmar713
Yeah I didn't think I was supposed to connect but wanted to be 100%. Thanks for the reassurance!