Phaserunner and CA3 - Does not Regen - I don't get why

Hi,

On my recent E-bike project, which generates a new problem for every problem I solve, I have yet a new problem:

It doesn't do regenerative braking even though I have set up everything just like I believe I should... Similar to how the bike was setup before the Phaserunner and pretty much identical to another bike I made with baserunner. Which only differs in battery and motor and the according settings.

The only weird thing that I notice with my bike is that on E-Brake phaserunner display a fault "Throttle out of range" which the baserunner bike does not.

See my settings:
Phaserunner Basic


Phaserunner Advanced


Phaserunner Dashboard, Ebrake not pulled


Phaserunner Dashboard, Ebrake pulled


CA3, Ebrake settings, I also tried to turn proportional regen OFF.


Any help is appreciated. Thank you.

Hi Raphael303,

I have a similar problem. Did you manage to fix it? What was it? On my baserunner the ebrake flag is not appearing even. The Fault at your configuration ist, that you need to change your Parameters on "Throttle Start Voltage" or increase your fault range. So your "idle" throttle voltage should be inside that range.