Help with correct torque sensor bottom bracket choice please

Get all your technical information about electric bikes here.
Post Reply
Jay73RX   1 mW

1 mW
Posts: 15
Joined: Jan 05 2021 1:36pm

Help with correct torque sensor bottom bracket choice please

Post by Jay73RX » Feb 05 2021 5:25am

Hi ,I’m looking at swapping out my torque sensor bottom bracket that’s currently fitted to my Super73 RX . I don’t like the design where the chain wheel spider fits on the bottom bracket via splines as they do not mesh together perfectly and so you get forward and backwards movement.I want to change to a bolt on spider .I’ve found two on AliExpress but one has a middle wire outlet and the other is a side mount wire . I think I need the middle mount wire type if you look where my wire comes out the frame . But the seller says my old unit looks like side mount wire . But is more like an inch in from the end I would think.
Any help would be great .
I’ve included the two AliExpress options and a pic of my old unit plus my frame .
Attachments
D864C62B-E7E0-4462-8C94-6F86BFB4F60A.png
D864C62B-E7E0-4462-8C94-6F86BFB4F60A.png (687.41 KiB) Viewed 171 times
42244946-EA75-42F9-AA06-56665F23538A.png
42244946-EA75-42F9-AA06-56665F23538A.png (2.9 MiB) Viewed 171 times
6534B116-D7D0-403A-8BA8-274FD8039857.jpeg
6534B116-D7D0-403A-8BA8-274FD8039857.jpeg (512.72 KiB) Viewed 171 times
3AF5BD4E-49B1-423C-94C7-FA71CF8A969D.png
3AF5BD4E-49B1-423C-94C7-FA71CF8A969D.png (3.75 MiB) Viewed 171 times

Post Reply